Effect of external actions on the magnetic properties and corrosion resistance of Co70.5Fe0.5Cr4Si7B18 amorphous alloy
- Authors: Permyakova I.E.1, Glezer A.M.1,2, Savchenko E.S.2, Shchetinin I.V.2
-
Affiliations:
- Bardin Central Research Institute of Ferrous Metallurgy
- National University of Science and Technology (MISiS)
- Issue: Vol 81, No 11 (2017)
- Pages: 1310-1316
- Section: Article
- URL: https://journals.rcsi.science/1062-8738/article/view/185223
- DOI: https://doi.org/10.3103/S1062873817110144
- ID: 185223
Cite item
Abstract
Variations in the magnetic characteristics (specific saturation magnetization and coercive force) of Co–Fe–Cr–Si–B amorphous alloy (AA) are studied after high-pressure torsion (HPT) and heat treatment. The behavior of AA magnetic properties is analyzed with respect to structural transformations caused by external actions. The corrosion resistance of AA upon transitioning from an amorphous to a crystalline state is investigated. The established optimum annealing and HPT conditions yield a satisfactory combination of the magnetic properties and corrosion resistance of the investigated alloy.
About the authors
I. E. Permyakova
Bardin Central Research Institute of Ferrous Metallurgy
Author for correspondence.
Email: inga_perm@mail.ru
Russian Federation, Moscow, 105005
A. M. Glezer
Bardin Central Research Institute of Ferrous Metallurgy; National University of Science and Technology (MISiS)
Email: inga_perm@mail.ru
Russian Federation, Moscow, 105005; Moscow, 119049
E. S. Savchenko
National University of Science and Technology (MISiS)
Email: inga_perm@mail.ru
Russian Federation, Moscow, 119049
I. V. Shchetinin
National University of Science and Technology (MISiS)
Email: inga_perm@mail.ru
Russian Federation, Moscow, 119049
Supplementary files
