Email this article Manufacturing individual beads of quartz glass via the selective laser melting of its powder
- Authors: Gusarov A.V.1,2, Protasov K.E.1, Khmyrov R.S.1
-
Affiliations:
- Moscow State Technological University (STANKIN)
- Institute of Photonic Technologies (LPT)
- Issue: Vol 80, No 8 (2016)
- Pages: 999-1002
- Section: Proceedings of the XI Conference “Lasers and Laser-Information Technologies: Fundamental Problems and Applications”
- URL: https://journals.rcsi.science/1062-8738/article/view/184795
- DOI: https://doi.org/10.3103/S1062873816080177
- ID: 184795
Cite item
Open Access
Access granted
Subscription Access
Abstract
When selective laser melting technology is applied to fragile materials, a part can crack during the manufacturing stage. Stable SLM conditions are found for quartz glass, under which individual beads of remolten powder are manufactured. The beads are fused with a solid support of the same material. No cracking is observed in the beads or in the supports near the formers.
About the authors
A. V. Gusarov
Moscow State Technological University (STANKIN); Institute of Photonic Technologies (LPT)
Author for correspondence.
Email: av.goussarov@gmail.com
Russian Federation, Moscow, 127055; Erlangen, 91052
K. E. Protasov
Moscow State Technological University (STANKIN)
Email: av.goussarov@gmail.com
Russian Federation, Moscow, 127055
R. S. Khmyrov
Moscow State Technological University (STANKIN)
Email: av.goussarov@gmail.com
Russian Federation, Moscow, 127055
Supplementary files
