Creation and experimental study of a planar solid-state laser based on a YAG:Yb 3+  crystal with diode edge pumping

M. G. Galushkin; V. P. Yakunin; A. G. Grigoriantz; R. G. Dyachkov; V. A. Funtikov; R. S. Tretiakov

doi:10.3103/S1062873816040110

Creation and experimental study of a planar solid-state laser based on a YAG:Yb³⁺ crystal with diode edge pumping

Autores: Galushkin M.G.¹, Yakunin V.P.¹, Grigoriantz A.G.², Dyachkov R.G.², Funtikov V.A.², Tretiakov R.S.³
Afiliações:
1. Institute of Laser and Information Technologies
2. Bauman State Technical University
3. Moscow Center for Laser Technologies
Edição: Volume 80, Nº 4 (2016)
Páginas: 440-443
Seção: Proceedings of the XI Conference “Lasers and Laser Information Technologies: Fundamental Problems and Applications”
URL: https://journals.rcsi.science/1062-8738/article/view/184264
DOI: https://doi.org/10.3103/S1062873816040110
ID: 184264

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

The results from calculations and preliminary experimental investigations of a solid-state laser manufactured in the form of a plate 15 × 10 × 0.3 mm in size and made of YAG:Yb³⁺ crystal with two-side diode edge pumping with a total power of 600 W at a wavelength of 940 nm are presented. Both stable and hybrid stable–unstable resonators are used in the experiment.