On Using an Acoustic Antenna Array for Testing Thermal Damages in Austenitic Steel by the Spectral Method
- Autores: Uglov A.1, Khlybov A.2, Pichkov S.3, Shishulin D.3
-
Afiliações:
- Scientific Research Center for Testing and Evaluating Technical Systems
- Nizhny Novgorod State Technical University
- JSC Afrikantov Experimental Design Bureau for Mechanical Engineering
- Edição: Volume 53, Nº 4 (2017)
- Páginas: 279-285
- Seção: Acoustic Methods
- URL: https://journals.rcsi.science/1061-8309/article/view/181324
- DOI: https://doi.org/10.1134/S1061830917040106
- ID: 181324
Citar
Resumo
Results of testing a technique for evaluating damages on the inner surface of austenitic-steel pipe samples by the spectral acoustic method with the use of an acoustic phased antenna array are provided. It is shown that accumulated damages can be revealed in the surface layer at a level of 10% of exhausting the resource of an article made of 12Kh18N10T steel.
Palavras-chave
Sobre autores
A. Uglov
Scientific Research Center for Testing and Evaluating Technical Systems
Autor responsável pela correspondência
Email: auglov@list.ru
Rússia, Nizhny Novgorod, 603950
A. Khlybov
Nizhny Novgorod State Technical University
Email: auglov@list.ru
Rússia, Nizhny Novgorod, 603950
S. Pichkov
JSC Afrikantov Experimental Design Bureau for Mechanical Engineering
Email: auglov@list.ru
Rússia, Nizhny Novgorod, 603074
D. Shishulin
JSC Afrikantov Experimental Design Bureau for Mechanical Engineering
Email: auglov@list.ru
Rússia, Nizhny Novgorod, 603074