Мақаланы E-mail арқылы жіберу Mechanoactivated SHS of Si–SiC Powders from Natural Sand: Influence of Milling Time
- Авторлар: Chanadee T.1,2, Singsarothai S.3
-
Мекемелер:
- Department of Materials Science and Technology, Faculty of Science
- Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME)
- Faculty of Engineering
- Шығарылым: Том 27, № 2 (2018)
- Беттер: 85-88
- Бөлім: Article
- URL: https://journals.rcsi.science/1061-3862/article/view/195927
- DOI: https://doi.org/10.3103/S1061386218020061
- ID: 195927
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
Si–SiC composite powders were SHS-produced from milled ‘natural sand–C–Mg’ precursors under pressure of Ar gas; and the effect of milling time τ on the morphology and phase composition of combustion product was investigated. The reduction in particle size of sand with increasing τ was extremely significant for the formation of Si–SiC composite powders due to an increase in the surface area of contact. Smaller sand particles yielded finer Si–SiC powders.
Негізгі сөздер
Авторлар туралы
T. Chanadee
Department of Materials Science and Technology, Faculty of Science; Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME)
Хат алмасуға жауапты Автор.
Email: tawat.ch@psu.ac.th
Таиланд, Hat Yai, Songkhla; Hat Yai, Songkhla
S. Singsarothai
Faculty of Engineering
Email: tawat.ch@psu.ac.th
Таиланд, Papayom, Pattalung
Қосымша файлдар
