SHS of Ti3SiC2-Based Materials in the Ti–Si–C System: Impact of Silicon Excess


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

For SHS of Ti3SiC2-based materials in the Ti–Si–C system, we explored the impact of silicon excess on the composition of resultant MAX-phase material by XRD and SEM methods. After hot pressing, SHS-produced MAX-phase material was found to contain over 88 wt % of Ti3SiC2. The SHS-produced powders are sinterable and deserve further studies on their hot pressing and pressure-less reactive sintering.

Негізгі сөздер

Авторлар туралы

J. Lis

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Хат алмасуға жауапты Автор.
Email: lis@agh.edu.pl
Польша, Cracow, 30-059

L. Chlubny

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Хат алмасуға жауапты Автор.
Email: leszek@agh.edu.pl
Польша, Cracow, 30-059

K. Witulska

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Email: leszek@agh.edu.pl
Польша, Cracow, 30-059

P. Borowiak

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Email: leszek@agh.edu.pl
Польша, Cracow, 30-059

K. Kozak

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Email: leszek@agh.edu.pl
Польша, Cracow, 30-059

A. Misztal

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Email: leszek@agh.edu.pl
Польша, Cracow, 30-059

O. Czajkowska

AGH University of Science and Technology, Faculty of Materials Science and Ceramics

Email: leszek@agh.edu.pl
Польша, Cracow, 30-059

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Allerton Press, Inc., 2019