电邮这篇文章 Intermetallic WSi2–W5Si3 Alloy by Magnesiothermic SHS Reaction
- 作者: Maung S.T.1,2, Chanadee T.3,2, Niyomwas S.4,2
-
隶属关系:
- Department of Mining and Materials Engineering, Faculty of Engineering
- Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME))
- Department of Materials Science and Technology, Faculty of Science
- Department of Mechanical Engineering, Faculty of Engineering
- 期: 卷 28, 编号 1 (2019)
- 页面: 50-55
- 栏目: Article
- URL: https://journals.rcsi.science/1061-3862/article/view/196028
- DOI: https://doi.org/10.3103/S1061386219010096
- ID: 196028
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Intermetallic tungsten silicide alloy WSi2–W5Si3 was successfully synthesized via magnesiothermic SHS reaction in the WO3–Si–Mg system. Equilibrium composition of combustion products was calculated by standard Gibbs energy minimization method and the combustion products were characterized by XRD, SEM, and EDX. The synthesized alloy had a density of 8.97 g/cm3 (96.4% of theoretical). The process can be readily recommended for practical implementation.
作者简介
S. Maung
Department of Mining and Materials Engineering, Faculty of Engineering; Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME))
Email: sutham.n@psu.ac.th
泰国, Hat Yai, Songkhla, 90110; Hat Yai, Songkhla, 90110
T. Chanadee
Department of Materials Science and Technology, Faculty of Science; Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME))
Email: sutham.n@psu.ac.th
泰国, Hat Yai, Songkhla, 90110; Hat Yai, Songkhla, 90110
S. Niyomwas
Department of Mechanical Engineering, Faculty of Engineering; Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME))
编辑信件的主要联系方式.
Email: sutham.n@psu.ac.th
泰国, Hat Yai, Songkhla, 90110; Hat Yai, Songkhla, 90110
补充文件
