Email this article Combustion of Si–C Mixtures in Nitrogen Gas: Impact of Iron-Containing Additives
- Authors: Barinova T.V.1, Borovinskaya I.P.1, Barinov V.Y.1, Kovalev I.D.1
-
Affiliations:
- Merzhanov Institute of Structural Macrokinetics and Materials Science (ISMAN)
- Issue: Vol 28, No 1 (2019)
- Pages: 39-44
- Section: Article
- URL: https://journals.rcsi.science/1061-3862/article/view/196023
- DOI: https://doi.org/10.3103/S1061386219010047
- ID: 196023
Cite item
Open Access
Access granted
Subscription Access
Abstract
The effect of iron-containing catalysts–FeCl3 · 6H2O, Fe2(C2O4)3 · 5H2O, and Fe(NO3)3 · 9H2O–on phase composition, morphology, and particle size of products formed upon combustion of Si–C mixtures in nitrogen gas. Composition and granulometry of combustion products were found to depend on a type and amount of the above additives to green composition. The results may turn interesting for researchers active in the synthesis of refractory silicon compounds.
About the authors
T. V. Barinova
Merzhanov Institute of Structural Macrokinetics and Materials Science (ISMAN)
Author for correspondence.
Email: tbarinova@ism.ac.ru
Russian Federation, Chernogolovka, Moscow oblast, 142432
I. P. Borovinskaya
Merzhanov Institute of Structural Macrokinetics and Materials Science (ISMAN)
Email: i2212@yandex.ru
Russian Federation, Chernogolovka, Moscow oblast, 142432
V. Yu. Barinov
Merzhanov Institute of Structural Macrokinetics and Materials Science (ISMAN)
Email: i2212@yandex.ru
Russian Federation, Chernogolovka, Moscow oblast, 142432
I. D. Kovalev
Merzhanov Institute of Structural Macrokinetics and Materials Science (ISMAN)
Author for correspondence.
Email: i2212@yandex.ru
Russian Federation, Chernogolovka, Moscow oblast, 142432
Supplementary files
