Multilayer coatings on Ti substrate by SHS method
- Авторы: Kamynina O.K.1, Vadchenko S.G.1, Shchukin A.S.1, Kovalev I.D.1
-
Учреждения:
- Institute of Structural Macrokinetics and Materials Science
- Выпуск: Том 25, № 4 (2016)
- Страницы: 238-242
- Раздел: Article
- URL: https://journals.rcsi.science/1061-3862/article/view/195763
- DOI: https://doi.org/10.3103/S106138621604004X
- ID: 195763
Цитировать
Аннотация
Explored was the deposition of multilayer TiCx–TixSiy-based coatings onto Ti substrate by SHS method. Sandwich-type green multilayer structures were assembled from Ti foils and Ti + 0.5C, Ti + Si, 5Ti + 3Si, and Ti + 0.65C pellets and ignited under 1 atm of Ar and a load (400 g). Burned sandwiches were characterized by SEM, EDS, and XRD. In all cases, we observed good metal–ceramic joining. Prerequisites for such a joining are (i) the presence of the liquid phase in combustion products, (ii) good metal–ceramic wettability, and (iii) closeness of reaction temperature to the melting point of substrate.
Ключевые слова
Об авторах
O. Kamynina
Institute of Structural Macrokinetics and Materials Science
Автор, ответственный за переписку.
Email: kuz@ism.ac.ru
Россия, Chernogolovka, Moscow, 142432
S. Vadchenko
Institute of Structural Macrokinetics and Materials Science
Email: kuz@ism.ac.ru
Россия, Chernogolovka, Moscow, 142432
A. Shchukin
Institute of Structural Macrokinetics and Materials Science
Email: kuz@ism.ac.ru
Россия, Chernogolovka, Moscow, 142432
I. Kovalev
Institute of Structural Macrokinetics and Materials Science
Email: kuz@ism.ac.ru
Россия, Chernogolovka, Moscow, 142432
Дополнительные файлы
