Thrust Slip Bearings in a Turbulent Friction Mode with the Rheological Properties of a Viscoelastic Lubricant


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Based on the concept of the turbulent flow of a viscoelastic lubricant, a two-component lubrication system consisting of mineral oil and a viscoelastic lubricant that represents a melt of fusible metals is considered. The results of studies on the tribological characteristics such as friction forces and the bearing capacity of friction assemblies are presented taking into account the viscosity and shear modulus of the molten layer depending on the temperature. Ways to improve the properties of lubricants through the introduction of additives and fillers therein are considered.

Sobre autores

I. Kolesnikov

Rostov State University of Transport Communications

Email: esnovickov@gmail.com
Rússia, Rostov-on-Don, 344038

E. Novikov

Rostov State University of Transport Communications

Autor responsável pela correspondência
Email: esnovickov@gmail.com
Rússia, Rostov-on-Don, 344038

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2019