Physical and numerical modeling of the process of rolling off of a tapered shaft of aviation purpose
- Autores: Sukhorukov R.1, Sidorov A.1, Alimov A.1, Nagimov M.2, Mukhtarov S.2, Utyashev F.2
-
Afiliações:
- Blagonravov Mechanical Engineering Research Institute
- Institute for Metals Superplasticity Problems
- Edição: Volume 45, Nº 6 (2016)
- Páginas: 538-545
- Seção: New Technologies in Mechanical Engineering
- URL: https://journals.rcsi.science/1052-6188/article/view/193100
- DOI: https://doi.org/10.3103/S1052618816060121
- ID: 193100
Citar
Resumo
One of the most promising methods of manufacturing axisymmetric parts of gas turbine engines is local deformation on specialized rolling mills. To design this class of manufacturing operations and equipment, it is effective to use physical and numerical modeling. The article has provided the method and results of physical and numerical finite-element modeling of local deformation process of a detail of a cone-with-cylinder type made of EI962–Sh chromium steel. Analyses of the energy-power parameters of the technical process and the possibility of the destruction of a part during the deformation process have been carried out.
Sobre autores
R. Sukhorukov
Blagonravov Mechanical Engineering Research Institute
Email: alexander.a.sidorov@gmail.com
Rússia, Moscow, 101990
A. Sidorov
Blagonravov Mechanical Engineering Research Institute
Autor responsável pela correspondência
Email: alexander.a.sidorov@gmail.com
Rússia, Moscow, 101990
A. Alimov
Blagonravov Mechanical Engineering Research Institute
Email: alexander.a.sidorov@gmail.com
Rússia, Moscow, 101990
M. Nagimov
Institute for Metals Superplasticity Problems
Email: alexander.a.sidorov@gmail.com
Rússia, Ufa, 450001
Sh. Mukhtarov
Institute for Metals Superplasticity Problems
Email: alexander.a.sidorov@gmail.com
Rússia, Ufa, 450001
F. Utyashev
Institute for Metals Superplasticity Problems
Email: alexander.a.sidorov@gmail.com
Rússia, Ufa, 450001