| 期 |
标题 |
文件 |
| 卷 46, 编号 4 (2017) |
Mixed-surface impregnation of gear wheels made of 13Kh3N3M2VFB-Sh age-hardenable integrally alloyed steel aimed at improving surface hardness, wear-resistance, and back-to-back endurance |
(Eng)
|
|
Smirnov A., Mokhova A., Semenov M., Kuksenova L., Fakhurtdinov R.
|
| 卷 46, 编号 4 (2017) |
Problems on comparing analytical and numerical estimations of stressed-deformed state of structure elements |
(Eng)
|
|
Doronin S., Rogalev A., Reizmunt E.
|
| 卷 46, 编号 4 (2017) |
Prevention of critical events combination in robotic welding |
(Eng)
|
|
Rezchikov A., Kushnikov V., Ivashchenko V., Fominykh D., Bogomolov A., Filimonyuk L.
|
| 卷 46, 编号 3 (2017) |
Finite-element calculations of thin-walled structures of concatenated shells with different material stress–strain properties |
(Eng)
|
|
Klochkov Y., Nikolaev A., Kiseleva T.
|
| 卷 46, 编号 3 (2017) |
Mathematical model of corrosion damage tolerance for structures loaded by varying load |
(Eng)
|
|
Timofeev A., Belov V.
|
| 卷 46, 编号 3 (2017) |
Effect of material state on the wear of filled polytetrafluoroethylene composite F4K20 on its basis |
(Eng)
|
|
Sedakova E., Kozyrev Y.
|
| 卷 46, 编号 3 (2017) |
Dependence of the recovery parameters of objects on the characteristics of the recovery process |
(Eng)
|
|
Sadykhov G., Babaev I.
|
| 卷 46, 编号 3 (2017) |
Effect of microrelief on the contact shakedown of fixed joints |
(Eng)
|
|
Aleksandrova M., Klebanov Y.
|
| 卷 46, 编号 2 (2017) |
Ranges of the validity of power scaling laws in the description of scale effects of the strength of extended elements of machines and structures |
(Eng)
|
|
Makhutov N., Reznikov D.
|
| 卷 46, 编号 2 (2017) |
Determination of safe operating conditions for supporting structures under abnormal loads |
(Eng)
|
|
Emel’yanov I., Mironov V., Kuznetsov A.
|
| 卷 46, 编号 2 (2017) |
Confidence limits for system reliability indices with increasing function of failure intensity |
(Eng)
|
|
Pavlov I.
|
| 卷 46, 编号 2 (2017) |
Estimators of the reliability index of a nonrepairable one-shot item by small statistical samples |
(Eng)
|
|
Belobragin B., Avotyn’ B., Denezhkin G.
|
| 卷 46, 编号 2 (2017) |
Renewal process and operation strategies in the theory of reliability of technical systems under prefailure lives distributed as a mixture of two exponential distributions |
(Eng)
|
|
Vaynshteyn I., Fedotova I., Tsibul’skiy G., Vaynshteyn Y.
|
| 卷 46, 编号 2 (2017) |
Cylindrical-probe diagnostics of plasma flows effusing from technological plasmatrons |
(Eng)
|
|
Kotel’nikov V., Kotel’nikov M.
|
| 卷 45, 编号 3 (2016) |
Taking into account the residual stresses during transverse calculation of the load frame to extend the service life above the warranty period |
(Eng)
|
|
Smirnov S., Konovalov D., Parshin S., Vyskrebentsev S., Perunov E., Degtyar’ V., Kalashnikov S.
|
| 卷 45, 编号 3 (2016) |
Computations of the least number of objects necessary for the cyclical reliability testing |
(Eng)
|
|
Sadykhov G., Babaev I.
|
| 卷 45, 编号 3 (2016) |
Computation model of composite cylindrical bearing working in steady-state regime for partial filling of gap with lubricant material |
(Eng)
|
|
Akhverdiev K., Zadorozhnaya N., Mukutadze A., Flek B.
|
| 卷 45, 编号 2 (2016) |
Deformation and strength properties of a carbon–carbide composite with 2D reinforcement under plane stress state |
(Eng)
|
|
Bobrov A., Sarbaev B., Shirshov Y.
|
| 卷 45, 编号 2 (2016) |
Problems of the operation of turbocompressors in an internal combustion engine and methods of increasing their reliability |
(Eng)
|
|
Smirnov A., Kosmynin A., Khvostikov A., Shchetinin V., Ivanova N.
|
| 卷 45, 编号 2 (2016) |
Simulation of a nonstationary contact in a sliding bearing with allowance for frictional heating and convective heat transfer |
(Eng)
|
|
Kolesnikov V., Kolosova E., Chebakov M.
|
| 卷 45, 编号 2 (2016) |
Wear mechanisms of polytetrafluoroethylene during its friction against various grades of steel |
(Eng)
|
|
Sedakova E., Kozyrev Y.
|
| 卷 45, 编号 2 (2016) |
Repair planning by calculating the damage distribution |
(Eng)
|
|
Chernyavsky A.
|
| 卷 45, 编号 1 (2016) |
Experimental–theoretical study of high-cycle failure of structural elements of VZh-159 alloy |
(Eng)
|
|
Antipov A., Gorokhov A., Gorokhov V., Kazakov D., Kapustin S.
|
| 卷 45, 编号 1 (2016) |
Methods, models, and means of efficiency improvement in the estimation of the technical condition and residual service life of technical devices |
(Eng)
|
|
Kuznetsov K.
|
| 卷 45, 编号 1 (2016) |
Providing the quality of complexly shaped machine elements at the design phase of the sheet stamping technological process |
(Eng)
|
|
Kashapova L., Pankratov D., Shibakov V., Vinogradov A.
|
| 76 - 100 的 106 信息 |
<< < 1 2 3 4 5 > >>
|
