Email this article Profiling of the Surface of the Working Elements of Mixing Devices
- Authors: Ganiev R.F.1, Reviznikov D.L.1,2, Sukharev T.Y.1,2, Ukrainskii L.E.1
-
Affiliations:
- Blagonravov Mechanical Engineering Research Institute
- Moscow Aviation Institute (National Research University)
- Issue: Vol 48, No 3 (2019)
- Pages: 191-196
- Section: Mechanics of Machines
- URL: https://journals.rcsi.science/1052-6188/article/view/194209
- DOI: https://doi.org/10.3103/S1052618819030051
- ID: 194209
Cite item
Open Access
Access granted
Subscription Access
Abstract
The results of computer modeling of mixing in a system of mobile coaxial cylinders are presented. Detailed spatial-temporal descriptions of the processes are obtained, and the principal structures in the flow field are determined. On the basis of the analysis of the singular points of the fluid vector field, a way of rotor profiling is proposed. The similarity numbers are introduced, which allow us to proceed from laboratory stand installations to real industrial devices.
About the authors
R. F. Ganiev
Blagonravov Mechanical Engineering Research Institute
Email: timur.suxarev@yandex.ru
Russian Federation, Moscow
D. L. Reviznikov
Blagonravov Mechanical Engineering Research Institute; Moscow Aviation Institute (National Research University)
Email: timur.suxarev@yandex.ru
Russian Federation, Moscow; Moscow
T. Yu. Sukharev
Blagonravov Mechanical Engineering Research Institute; Moscow Aviation Institute (National Research University)
Author for correspondence.
Email: timur.suxarev@yandex.ru
Russian Federation, Moscow; Moscow
L. E. Ukrainskii
Blagonravov Mechanical Engineering Research Institute
Email: timur.suxarev@yandex.ru
Russian Federation, Moscow
Supplementary files
