Development of the Technology of Manufacturing Aerospace Composite Tubular Elements by Radial Braiding
- Authors: Samipour S.A.1, Khaliulin V.I.1, Batrakov V.V.1
-
Affiliations:
- Tupolev Kazan National Research Technical University
- Issue: Vol 47, No 3 (2018)
- Pages: 284-289
- Section: New Technologies in Mechanical Engineering
- URL: https://journals.rcsi.science/1052-6188/article/view/193890
- DOI: https://doi.org/10.3103/S1052618818030135
- ID: 193890
Cite item
Abstract
A technology for manufacturing a preform for aerospace composite tubular elements by radial weaving is considered. The procedure for selecting the material, the algorithm for determining the preform parameters, and the process of manufacturing and maintaining the accuracy of the reinforcing angle, which are proposed in this study, allow the required thermomechanical characteristics of the composite structure to be achieved.
About the authors
S. A. Samipour
Tupolev Kazan National Research Technical University
Author for correspondence.
Email: samipour@mail.ru
Russian Federation, Kazan
V. I. Khaliulin
Tupolev Kazan National Research Technical University
Email: samipour@mail.ru
Russian Federation, Kazan
V. V. Batrakov
Tupolev Kazan National Research Technical University
Email: samipour@mail.ru
Russian Federation, Kazan
Supplementary files
