Chromium and Detonation Nanodiamond Based Coatings of the Chromium–Carbon System: Deposition by Magnetron Sputtering, Peculiarities of Phase Composition, and Tribological Properties
- Authors: Khrushchov M.M.1, Atamanov M.V.2, Shevchenko N.V.3, Marchenko E.A.1, Levin I.S.1,4, Petrzhik M.I.5, Miroshnichenko V.I.2, Antonova O.S.1,6, Reilyanu M.D.4
-
Affiliations:
- Blagonravov Mechanical Engineering Research Institute
- INACOTEC Centre Limited
- Petrovskii Research Centre Fugas
- Moscow State University
- National University of Science and Technology MISIS
- Baikov Institute of Metallurgy and Materials Science
- Issue: Vol 47, No 2 (2018)
- Pages: 160-167
- Section: Reliability, Strength, and Wear Resistance of Machines and Structures
- URL: https://journals.rcsi.science/1052-6188/article/view/193808
- DOI: https://doi.org/10.3103/S105261881802005X
- ID: 193808
Cite item
Abstract
The structure, the chemical and phase compositions, and the micromechanical and tribological properties of chromium–carbon coatings obtained by the magnetron sputtering of composite and/or sintered chromium–nanodiamond targets are investigated. The coatings possess the composite multiphase structure composed of chromium and its phases formed as a result of the chemical interactions of the target material’s components both between each other and with the reactive gas if present in a sputtering atmosphere. Several technological factors influencing the structural and phase peculiarities of the coatings, their nanohardness, and the dry friction behavior at high contact pressures are studied.
About the authors
M. M. Khrushchov
Blagonravov Mechanical Engineering Research Institute
Author for correspondence.
Email: michel_x@mail.ru
Russian Federation, Moscow
M. V. Atamanov
INACOTEC Centre Limited
Email: michel_x@mail.ru
Russian Federation, Moscow
N. V. Shevchenko
Petrovskii Research Centre Fugas
Email: michel_x@mail.ru
Russian Federation, Moscow, JSC
E. A. Marchenko
Blagonravov Mechanical Engineering Research Institute
Email: michel_x@mail.ru
Russian Federation, Moscow
I. S. Levin
Blagonravov Mechanical Engineering Research Institute; Moscow State University
Email: michel_x@mail.ru
Russian Federation, Moscow; Moscow
M. I. Petrzhik
National University of Science and Technology MISIS
Email: michel_x@mail.ru
Russian Federation, Moscow
V. I. Miroshnichenko
INACOTEC Centre Limited
Email: michel_x@mail.ru
Russian Federation, Moscow
O. S. Antonova
Blagonravov Mechanical Engineering Research Institute; Baikov Institute of Metallurgy and Materials Science
Email: michel_x@mail.ru
Russian Federation, Moscow; Moscow
M. D. Reilyanu
Moscow State University
Email: michel_x@mail.ru
Russian Federation, Moscow