Mass Transfer from a Drop in Fall into the Fluid Thickness

High-speed videorecording is used to trace the fine structure evolution in the case of freely falling drop matter propagation beneath the deformed surface of a fluid, initially at rest. The coalescence of a water drop with ammonium rhodanide solution and drops of sodium chloride solution, sodium carbonate, and ink with water is studied. In the initial stage of the coalescence process occurring in the impact regime with rapid cavity formation the drop loses the continuity. Short thin jetlets penetrating the cavity bottom are visualized for the first time. The earlier-observed drop disintegration into thin fibers that form linear or reticular structures on the cavity and crown surfaces is confirmed.
The jetlets that contain the drop matter merge gradually and form an intermediate fibrous layer embracing the cavity; this layer possesses a well-defined outer boundary. As the cavity enlarges, the intermediate layer homogenizes and becomes thinner. Further on, in the process of cavity collapse new fiber groups are formed in the target fluid; they penetrate the cavity boundary beneath the grid nodes. In the experiments performed the fibrous layer embracing the primary cavity was observable, when a fluid of greater density (ink, sodium carbonate, or sodium chloride solution drops) intruded into a less dense medium (water) or when a fluid of smaller density (water droplets) was introduced
into a heavier fluid (ammonium rhodanide solution). The fibrous shell of the primary cavity becomes thicker with increase in the drop velocity.