Kinetic model of copper electrodeposition in sulfate solution containing trisodium citrate complexing agent


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Simultaneous solution of two kinetic models of electrodeposition of copper in sulfate solution is studied in this paper. Bulk concentration of species involved in the numerical solution was calculated using MATLAB software. COMSOL Multiphysics software was used for the numerical solution of copper electrodeposition. Numerical results were evaluated using experimental data obtained by linear sweep voltammetry technique. The experimental data was almost fitted using COMSOL optimization physic module. It was found that kinetic parameters of Cu2+ (k1Cu), Cu1+ (k2Cu), and CuCitH (k1CuCitH) and diffusion coefficient and charge transfer coefficient of Cu2+ (\({D_{C{u^{2 + }}}}\), αCu1), Cu1+Cu2) and CuCitH (DCuCitH, αCuCitH) affect the fitting of the experimental data with the computed ones. The variables such as concentration profiles and optimum kinetic parameters that cannot be experimentally measured were achieved by analysis of the model. The parameters, that not affect the fitting, were recognized and kept constant when using the optimization.

作者简介

S. Mousavi Khoie

Department of Mining and Metallurgy

编辑信件的主要联系方式.
Email: mmousavi@aut.ac.ir
伊朗伊斯兰共和国, Tehran

M. Yousefi

Department of Mining and Metallurgy

Email: mmousavi@aut.ac.ir
伊朗伊斯兰共和国, Tehran

M. Ghasemifard

Nanotechnology Laboratory

Email: mmousavi@aut.ac.ir
伊朗伊斯兰共和国, Esfarayen

G. Heidari

Department of Mining and Metallurgy

Email: mmousavi@aut.ac.ir
伊朗伊斯兰共和国, Tehran

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2016