Producing Structural-Steel Bar from Continuous-Cast Billet
- 作者: Smirnov A.1, Smirnov E.2, Sklyar V.2, Belevitin V.3, Pivovarov R.2
-
隶属关系:
- Physical and Technological Institute of Metals and Alloys
- Stary Oskol Branch
- South Ural State Humanitarian and Pedagogical University
- 期: 卷 48, 编号 4 (2018)
- 页面: 233-239
- 栏目: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180077
- DOI: https://doi.org/10.3103/S0967091218040113
- ID: 180077
如何引用文章
详细
The expanded use of continuous-cast billet in the production of structural-steel bar is considered. The quality of 135 × 135 mm continuous-cast billet produced on a standard continuous-casting machine and the bar derived from it is evaluated. At more recently built plants, the production of quality bar from continuous- cast billet requires total extension of the order of 6–7. On the basis of the analysis developed in the present work, it is possible to determine the maximum critical bar cross section such that the required properties are ensured.
作者简介
A. Smirnov
Physical and Technological Institute of Metals and Alloys
编辑信件的主要联系方式.
Email: stalevoz@i.ua
乌克兰, Kiev
E. Smirnov
Stary Oskol Branch
Email: stalevoz@i.ua
俄罗斯联邦, Stary Oskol
V. Sklyar
Stary Oskol Branch
Email: stalevoz@i.ua
俄罗斯联邦, Stary Oskol
V. Belevitin
South Ural State Humanitarian and Pedagogical University
Email: stalevoz@i.ua
俄罗斯联邦, Chelyabinsk
R. Pivovarov
Stary Oskol Branch
Email: stalevoz@i.ua
俄罗斯联邦, Stary Oskol