Influence of mold flux on the thermal processes in the mold
- 作者: Anisimov K.1,2, Longinov A.1,2, Gusev M.3, Zarubin S.3
-
隶属关系:
- Bardin Central Research Institute of Ferrous Metallurgy
- OOO Korad
- Bauman Moscow State Technical University
- 期: 卷 46, 编号 8 (2016)
- 页面: 589-594
- 栏目: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/178961
- DOI: https://doi.org/10.3103/S0967091216080027
- ID: 178961
如何引用文章
详细
Analysis of the literature on the thermophysical properties of mold flux shows that the measurement results for the thermophysical properties of the slag vary significantly, depending on the method employed. On that basis, a model is proposed for calculating the heat flux in the system consisting of the ingot, the slag film, and the mold. Literature data regarding the properties of the slag and industrial data regarding the mold’s wall temperature are employed here. The proposed model permits investigation of the heat flux as a function of the thickness and physicochemical properties of the mold flux.
作者简介
K. Anisimov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
编辑信件的主要联系方式.
Email: akn@corad.ru
俄罗斯联邦, Moscow; Moscow
A. Longinov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: akn@corad.ru
俄罗斯联邦, Moscow; Moscow
M. Gusev
Bauman Moscow State Technical University
Email: akn@corad.ru
俄罗斯联邦, Moscow
S. Zarubin
Bauman Moscow State Technical University
Email: akn@corad.ru
俄罗斯联邦, Moscow