Quality of the Seam in Welding under Flux by Means of Barium–Strontium Carbonatite

Аннотация

The use of barium–strontium carbonatite in the modification and refining of ferrocarbon alloys is considered. Its use in welding fluxes is proposed. That possibility is analyzed for the example of BSK-2 barium–strontium modifier (Technical Specifications TU 1717-001-75073896–2005) produced by OOO NPK Metalltekhnoprom, with the following composition: 13.0–19.0% BaO, 3.5–7.5% SrO, 17.5–25.5% CaO, 19.8–29.8% SiO₂, 0.7–1.1% MgO, 2.5–3.5% K₂O, 1.0–2.0% Na₂O, 1.5–6.5% Fe₂O₃, 0–0.4% MnO, 1.9–3.9% Al₂O₃, 0.7–1.1% TiO₂, and 16.0–20.0% CO₂. A production technology is proposed for a flux additive containing 70% barium–strontium carbonatite and 30% liquid glass. Several welding-flux compositions based on slag from silicomanganese production are tested. The flux additive is introduced in quantities of 1, 3, and 5%. The specifics of welding under the proposed welding fluxes are determined. The chemical composition of the fluxes, the slag crusts, and the metal in the weld seam are determined by X-ray spectral analysis. The weld seams are studied metallographically. It is possible in principle to use barium–strontium carbonatite as a refining additive to welding fluxes; it also provides a protective atmosphere for the welded metal. By introducing barium–strontium carbonatite, the content of nonmetallic inclusions (nondeforming silicates, point oxides, and brittle silicates) in the weld seam may be reduced, and the desulfurizing properties of the welding fluxes may be enhanced. The introduction of up to 5% barium–strontium carbonatite in welding fluxes based on silicomanganese slag ensures that the metal in the weld seam has ferrite–pearlite structure of Widmanstatten type. The grain size is slightly reduced here: from a score of 4 to 4–5.