Long-term operation surface changes in differentially quenched 100-m rails

Аннотация

By optical microscopy and transmission electron diffraction microscopy, the evolution of the structural and phase states in the surface layers over a depth of 10 mm in the head of differentially quenched rail (category DT350) is studied, as the rail is subjected to passed tonnage of 691.8 million t at the experimental loop of AO VNIIZhT. In the initial state, the following structural components are present in the rail head: plate-pearlite grains (relative content 0.7); mixed ferrite–carbide grains (0.25); and grains of structure-free ferrite. After experiencing a passed tonnage of 691.8 million t, this state only remains beyond a depth of 10 mm. At that depth, a large quantity of bend extinction contours is observed. That indicates elastoplastic distortion of the material’s crystal lattice. The stress concentrators in the steel are intraphase and interphase boundaries of the ferrite and pearlite grains, cementite and ferrite plates in pearlite colonies, and globular cementite and ferrite particles. Structural transformations are observed at the macro level: microcracks appear, running at acute angles from the surface to a depth of 140 μm; and a decarburized layer is formed. At the micro level, elastoplastic stress fields are formed, and the cementite plates in the pearlite colonies break down. The stress concentrators in that case are intraphase and interphase boundaries of the ferrite and pearlite grains, cementite and ferrite plates in pearlite colonies, and globular cementite and ferrite particles. In structure-free ferrite grains, cementite nanoparticles are formed. The results are compared with the evolution of the structural and phase states at the surface of a recess in bulk-quenched rail as the rail is subjected to gross loads of 500 million t: the transformation of the structural and phase states in the surface layers is more pronounced. Plate pearlite is characterized by solution of the cementite plates. That leads to the formation of chains of globular carbide particles at the sites of the cementite plates. This may be associated with transfer of the carbon atoms from the cementite lattice to dislocations.