Composition of C–Si–Mn–Cr–W–V powder wire and quality of surfacing
- Авторы: Kozyrev N.1, Kibko N.1, Umanskii A.1, Titov D.1, Bashchenko L.1
-
Учреждения:
- Siberian State Industrial University
- Выпуск: Том 46, № 11 (2016)
- Страницы: 781-787
- Раздел: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179174
- DOI: https://doi.org/10.3103/S0967091216110073
- ID: 179174
Цитировать
Аннотация
The influence of the composition of powder wire on the properties of the applied layer on steel samples is studied in the laboratory. If amorphous graphite in 35V9Kh3SF powder wire is replaced by material containing carbon and fluorine, the porosity of the applied layer is reduced, and fewer nonmetallic inclusions (including row oxide inclusions and undeformable silicates) are present. Statistical analysis of the experimental data illustrates the influence of the carbon equivalent of the 35V9Kh3SF powder wire on the hardness of the applied layer (including the mean surface hardness and the microhardness of martensite). With increase in the carbon equivalent calculated by the Paton Institute’s formula, the hardness of the applied layer linearly increases.
Ключевые слова
Об авторах
N. Kozyrev
Siberian State Industrial University
Автор, ответственный за переписку.
Email: Kozyrev_na@mtsp.sibsiu.ru
Россия, Novokuznetsk
N. Kibko
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Россия, Novokuznetsk
A. Umanskii
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Россия, Novokuznetsk
D. Titov
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Россия, Novokuznetsk
L. Bashchenko
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Россия, Novokuznetsk