Composition of C–Si–Mn–Cr–W–V powder wire and quality of surfacing
- Авторлар: Kozyrev N.1, Kibko N.1, Umanskii A.1, Titov D.1, Bashchenko L.1
-
Мекемелер:
- Siberian State Industrial University
- Шығарылым: Том 46, № 11 (2016)
- Беттер: 781-787
- Бөлім: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179174
- DOI: https://doi.org/10.3103/S0967091216110073
- ID: 179174
Дәйексөз келтіру
Аннотация
The influence of the composition of powder wire on the properties of the applied layer on steel samples is studied in the laboratory. If amorphous graphite in 35V9Kh3SF powder wire is replaced by material containing carbon and fluorine, the porosity of the applied layer is reduced, and fewer nonmetallic inclusions (including row oxide inclusions and undeformable silicates) are present. Statistical analysis of the experimental data illustrates the influence of the carbon equivalent of the 35V9Kh3SF powder wire on the hardness of the applied layer (including the mean surface hardness and the microhardness of martensite). With increase in the carbon equivalent calculated by the Paton Institute’s formula, the hardness of the applied layer linearly increases.
Негізгі сөздер
Авторлар туралы
N. Kozyrev
Siberian State Industrial University
Хат алмасуға жауапты Автор.
Email: Kozyrev_na@mtsp.sibsiu.ru
Ресей, Novokuznetsk
N. Kibko
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Ресей, Novokuznetsk
A. Umanskii
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Ресей, Novokuznetsk
D. Titov
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Ресей, Novokuznetsk
L. Bashchenko
Siberian State Industrial University
Email: Kozyrev_na@mtsp.sibsiu.ru
Ресей, Novokuznetsk