| Edição |
Título |
Arquivo |
| Volume 46, Nº 11 (2016) |
Erratum to: “Strategic risk management in innovative metallurgical investment” |
|
|
Goncharenko L., Filin S., Nalesnaya E.
|
| Volume 47, Nº 1 (2017) |
European perspectives on the extractive metallurgy of iron |
|
|
Kurunov I.
|
| Volume 46, Nº 11 (2016) |
Evaporation of reaction-zone components in the low-temperature plasma treatment of chromium-bearing melts |
|
|
Rumyantsev B., Komolova O., Grigorovich K., Garber A.
|
| Volume 48, Nº 7 (2018) |
Evolution of the Defect Structure of Pearlitic Steel in Cold Deformation |
|
|
Parusov E., Sukhomlin G., Gubenko S., Sychkov A., Denisenko A., Kamalova G.
|
| Volume 46, Nº 7 (2016) |
Expansion of a pair of dissimilar metal shells in lined-pipe production |
|
|
Bogatov N., Bogatov A., Salikhyanov D.
|
| Volume 47, Nº 3 (2017) |
Expansion of large-diameter welded pipe |
|
|
Kolikov A., Zvonarev D.
|
| Volume 49, Nº 8 (2019) |
Experience in the Development of Production of Rolled Stock from Microalloyed Steels for Shipbuilding by NLMK DanSteel |
|
|
Goli-Oglu E.
|
| Volume 49, Nº 12 (2019) |
Experience of Rolling Patterns with an Inverse Temperature Wedge on the NShSGP 2000 Continuous Wide-Strip Hot-Rolling Mill |
|
|
Solov’ev V., Bobkov E., Zhovnodii N., Mazur I.
|
| Volume 48, Nº 10 (2018) |
Experience of Using the Integral Indicator of the Domain Charge in Selecting the Basic Mode of the Domain Melt |
|
|
Togobitskaya D., Bel’kova A., Murav’eva I., Stepanenko D.
|
| Volume 48, Nº 9 (2018) |
Experiment Planning in the Simulation of Industrial Processes |
|
|
Akberdin A., Kim A., Sultangaziev R.
|
| Volume 49, Nº 8 (2019) |
Experimental Study of Refining and Modification of Steel with Si–Ca, Si–Sr, and Si–Ba Alloys |
|
|
Bakin I., Shaburova N., Ryabchikov I., Mizin V., Belov B., Mikhailov G., Senin A.
|
| Volume 48, Nº 12 (2018) |
Expert Module of the Thermal Probes System for Blast Furnace Charging Control |
|
|
Semenov Y., Shumelchik E., Horupakha V.
|
| Volume 47, Nº 4 (2017) |
Extending sleeve life in a borehole pipe by thermocyclic treatment |
|
|
Samoilovich Y.
|
| Volume 46, Nº 9 (2016) |
Extraction of iron from copper-plant slag |
|
|
Lykasov A., Ryss G., Sharafutdinov D., Pogodin A.
|
| Volume 46, Nº 5 (2016) |
Extraction of zinc and iron from electrosmelting dust |
|
|
Nemchinova N., Chernykh V., Tyutrin A., Patrushov A.
|
| Volume 48, Nº 7 (2018) |
Factors Affecting the Life of Steel Grating Bars in Roasting Cars |
|
|
Ivanov D., Kozhukhov A., Sklyar V.
|
| Volume 47, Nº 6 (2017) |
Failure of large-diameter steel pipe with rolling scabs |
|
|
Shinkin V.
|
| Volume 46, Nº 3 (2016) |
Failure of metallurgical sinter |
|
|
Ryabchikov M., Grebennikova V., Ryabchikova E., Bogdanov N.
|
| Volume 46, Nº 1 (2016) |
Fast replacement of submersible tundish nozzles in a continuous slab-casting machine |
|
|
Eron’ko S., Oshovskaya E., Tkachev M.
|
| Volume 47, Nº 1 (2017) |
Faster ray tracing in the modeling of radiant heat transfer |
|
|
Koptelov R., Konashkova A.
|
| Volume 49, Nº 9 (2019) |
Fatigue Process in Materials for Automotive Industry |
|
|
Pachurin G., Goncharova D., Philippov A., Nuzhdina T., Deev V.
|
| Volume 49, Nº 10 (2019) |
Fatigue Resistance Changes of Structural Steels at Different Load Spectra |
|
|
Myl’nikov V., Shetulov D., Kondrashkin O., Chernyshov E., Pronin A.
|
| Volume 48, Nº 5 (2018) |
Flexural Forces of the Working Rollers and the Broadening of Thin Steel Strip in Hot Rolling |
|
|
Koinov T., Bel’skii S., Mukhin Y., Chuprov V.
|
| Volume 48, Nº 11 (2018) |
Flux-Cored Wire for the Surfacing of Parts Subject to Wear |
|
|
Gusev A., Usol’tsev A., Kozyrev N., Kibko N., Bashchenko L.
|
| Volume 48, Nº 12 (2018) |
Forces in a Cone Crusher |
|
|
Sakharov D., Vitushkin A.
|
| 151 - 175 de 623 resultados |
<< < 2 3 4 5 6 7 8 9 10 11 > >> |
