Enviar artigo por via de e-mail Production of mineral binder from steel-smelting slag
- Autores: Mikheenkov M.A.1, Sheshukov O.Y.1,2, Nekrasov I.V.1, Egiazar’yan D.K.1, Lobanov D.A.1
-
Afiliações:
- OAO IMET, Ural Branch
- Ural Federal University named after the first President of Russia B.N.Yeltsin
- Edição: Volume 46, Nº 3 (2016)
- Páginas: 232-235
- Seção: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/178634
- DOI: https://doi.org/10.3103/S0967091216030098
- ID: 178634
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The phase composition of steel-smelting slag may be processed to obtain mineral binder. Gypsumbased binder has been produced on the basis of refining slag from the ladle–furnace unit. Hydraulic-binder clinker may be obtained on the basis of steel-smelting slag. The possibility of processing such slag to obtain mineral binder is demonstrated.
Palavras-chave
Sobre autores
M. Mikheenkov
OAO IMET, Ural Branch
Email: ivn84@bk.ru
Rússia, Yekaterinburg
O. Sheshukov
OAO IMET, Ural Branch; Ural Federal University named after the first President of Russia B.N.Yeltsin
Email: ivn84@bk.ru
Rússia, Yekaterinburg; Yekaterinburg
I. Nekrasov
OAO IMET, Ural Branch
Autor responsável pela correspondência
Email: ivn84@bk.ru
Rússia, Yekaterinburg
D. Egiazar’yan
OAO IMET, Ural Branch
Email: ivn84@bk.ru
Rússia, Yekaterinburg
D. Lobanov
OAO IMET, Ural Branch
Email: ivn84@bk.ru
Rússia, Yekaterinburg
Arquivos suplementares
