| Шығарылым |
Атауы |
Файл |
| Том 48, № 4 (2018) |
Determining the Energy Expenditures in Continuous Cold Rolling |
|
|
Kozhevnikov A., Volkov V.
|
| Том 49, № 2 (2019) |
Determining the Fatigue Characteristics of Material on the Basis of Stress-Wave Emission |
|
|
Savel’ev A., Savel’eva E., Anisimov D., Prokhorenko O.
|
| Том 47, № 4 (2017) |
Determining the gas trajectory in blast-furnace injection of pulverized coal |
|
|
Lyalyuk V., Tarakanov A., Kassim D., Otorvin P., Pinchuk D.
|
| Том 46, № 3 (2016) |
Determining the wear and abrasive properties of foundry coke |
|
|
Vdovin K., Ivanova V.
|
| Том 49, № 12 (2019) |
Developing the Technology of Regenerative Siderite Ore Roasting in Shaft Furnaces |
|
|
Yur’ev B., Gol’tsev V., Dudko V.
|
| Том 49, № 5 (2019) |
Development and Industrial Testing of a Slag-Segregation System for Steel Casting |
|
|
Eremenko Y., Poleshchenko D.
|
| Том 49, № 10 (2019) |
Development of a Steel Temperature Prediction Model in a Steel Ladle and Tundish in a Casting and Rolling Complex |
|
|
Botnikov S., Khlybov O., Kostychev A.
|
| Том 49, № 12 (2019) |
Development of an Information Modeling System of Coal-Dust Fuel Injection into Tuyeres of a Blast Furnace |
|
|
Shvydkii V., Kudelin S., Gurin I., Noskov V.
|
| Том 49, № 12 (2019) |
Development Prospects of Alloys with Specific Physical Properties (Overview) |
|
|
Libman M.
|
| Том 49, № 11 (2019) |
Diagnostic Evaluation Sequence of the Technical State of Rolling-Mill Pinion Stands (Report 2) |
|
|
Sidorov V.
|
| Том 47, № 8 (2017) |
Diagnostics of blast-furnace linings |
|
|
Gordon Y., Sadri A., Mironov K., Spirin N.
|
| Том 47, № 12 (2017) |
Differences in the Properties of Ti–C–Mo–S Antifrictional Coatings on 40Kh and 20Kh13 Steel |
|
|
Shubin A., Potekaev A., Savostikov V., Tabachenko A., Galsanov S.
|
| Том 47, № 5 (2017) |
Differential heat treatment of one-piece freight-car wheels |
|
|
Sarsembaeva T., Kanaev A., Taimanova G.
|
| Том 46, № 10 (2016) |
Differential heat treatment of rails by means of rolling heat |
|
|
Polevoi E., Yunin G., Temlyantsev M.
|
| Том 47, № 1 (2017) |
Diffusional chrome plating of steel by iodide transport |
|
|
Bogdanov S., Khristyuk N.
|
| Том 48, № 12 (2018) |
Direct Alloying of Steel with Manganese in Electrosmelting |
|
|
Dmitrienko A., Protopopov E., Dmitrienko V., Yakushevich N., Goryushkin V.
|
| Том 48, № 2 (2018) |
Disintegration of Composite Electroexplosive Coatings in Spark Erosion |
|
|
Romanov D., Protopopov E.
|
| Том 47, № 2 (2017) |
Distribution of boron between oxide slag and steel |
|
|
Sychev A., Salina V., Babenko A., Zhuchkov V.
|
| Том 49, № 4 (2019) |
Drawing of Thin-Walled Welded Pipe |
|
|
Myshechkin A., Osadchii V.
|
| Том 47, № 1 (2017) |
Dry slipping steel–steel contact at high current density |
|
|
Aleutdinova M., Fadin V., Rubtsov V.
|
| Том 46, № 2 (2016) |
Dual control in the last stage of oxygen injection in the converter |
|
|
Myshlyaev L., Ageev D., Chernyavskii S.
|
| Том 46, № 5 (2016) |
Dust formation in the arc heating of zinc-plated steel |
|
|
Alpatova A., Simonyan L., Isakova N.
|
| Том 46, № 9 (2016) |
Dynamic model of the ladle treatment of steel |
|
|
Tikhonov G., Rudnitskii I., Voskoboinik M.
|
| Том 46, № 10 (2016) |
Economically alloyed high-strength steel for use in mine equipment |
|
|
Nikitin V., Nastich S., Smirnov L., Mal’tsev A., Denisov S., Chevskaya O., Brylin A., Kurash V., Maslyuk V., Tarasov V.
|
| Том 47, № 5 (2017) |
Edge geometry of pipe blanks produced by JCOE flexure |
|
|
Zhigulev G., Fadeev V., Samusev S.
|
| Нәтижелер 623 - 101/125 |
<< < 1 2 3 4 5 6 7 8 9 10 > >> |
