Шығарылым |
Атауы |
Файл |
Том 46, № 11 (2016) |
Strong bimetallic structural material alloyed with nitrogen |
|
Avdeenko A., Molyarov V., Kalashnikova A., Bocharov A., Molyarov A.
|
Том 46, № 4 (2016) |
Structural and phase states in high-quality rail |
|
Peregudov O., Gromov V., Ivanov Y., Morozov K., Konovalov S.
|
Том 48, № 4 (2018) |
Structural Changes of High-Temperature Nickel Alloy Containing Rhenium and Lanthanum on Heat Treatment |
|
Nikonenko E., Popova N., Sizonenko N., Dement T., Koneva N.
|
Том 49, № 5 (2019) |
Structural Evolution of Thin-Plate Pearlite in Wire-Blank Production |
|
Parusov E., Gubenko S., Sychkov A., Chuiko I., Sagura L., Kamalova G.
|
Том 49, № 12 (2019) |
Structural Suitability Analysis of Metals and Alloys: Communication 1 |
|
Meshkov Y., Shiyan A.
|
Том 49, № 1 (2019) |
Structural Viability of Steel with Stress Concentrations under Uniaxial Tension |
|
Shiyan A., Meshkov Y.
|
Том 48, № 7 (2018) |
Structure and Properties of Carbon Steel Wire in Drawing |
|
Chukin M., Polyakova M., Pivovarova K., Efimova Y., Gulin A.
|
Том 47, № 6 (2017) |
Structure and properties of H-beams after accelerated water cooling |
|
Ivanov Y., Belov E., Gromov V., Konovalov S., Kosinov D.
|
Том 47, № 11 (2017) |
Structure and Properties of Superlow-Carbon Martensitic Steel after Controlled Rolling and Tempering |
|
Shabalov I., Filippov V., Baeva L., Chevskaya O.
|
Том 47, № 3 (2017) |
Structure formation in high-strength nitrogen-bearing steel on hot deformation |
|
Fomina O.
|
Том 47, № 8 (2017) |
Structure formation in wire |
|
Sychkov A., Stolyarov A., Kamalova G., Efimova Y., Egorova L., Gulin A.
|
Том 48, № 4 (2018) |
Structure of a Carbon Steel–Stainless Steel Bimetal |
|
Shlyakhova G., Barannikova S., Bochkareva A., Li Y., Zuev L.
|
Том 49, № 5 (2019) |
Structure of Amorphous Phase and Nanocrystalline Phases in the Devitrification of Iron Alloys |
|
D’yakonova N., D’yakonov D., Kornienkov B., Filippova V.
|
Том 48, № 5 (2018) |
Structure of Fe–Nb–Cu–Si–B Nanocrystalline Alloy Strip Produced by Melt Spinning |
|
Kuznetsov P., Klimov V., Kirilenko D., Yagovkina M., Samodelkin E.
|
Том 49, № 10 (2019) |
Study of Strain and Structural Peculiarities in Different Stages of Two- and Three-High Screw Rolling |
|
Skripalenko M., Romantsev B., Galkin S., Kaputkina L., Skripalenko M.
|
Том 49, № 11 (2019) |
Study of the Behavior of Dioxins and Furans in the Zinc and Lead Removal Process from EAF Dust |
|
Simonyan L., Demidova N.
|
Том 49, № 9 (2019) |
Study of the Structural Condition of Metal in Billet after Deformation in the Continuous-Casting Line |
|
Smirnov E., Smirnov A., Sklyar V., Mikheev V., Belevitin V., Orlov G., Verzilov A.
|
Том 49, № 1 (2019) |
Sulfur and Gas Removal from Hot Metal by Injecting Disperse Magnesium in a Gas Jet |
|
Vergun A., Shevchenko A., Kislyakov V., Molchanov L., Dvoskin B.
|
Том 49, № 10 (2019) |
Surface Finish Enhancement of Hot-Rolled Strips on the 2000 Wide-Strip Rolling Mill Using Mathematical Modeling at Novolipetsk Steel |
|
Pimenov V., Dagman A., Pogodaev A., Kovalev D., Zhovnodii N.
|
Том 47, № 12 (2017) |
Surface Hardening of Hard Tungsten-Carbide Alloys: A Review |
|
Oskolkova T., Glezer A.
|
Том 47, № 10 (2017) |
Surface of high-chromium steel modified by an intense pulsed electron beam |
|
Ivanov Y., Klopotov A., Petrikova E., Abzaev Y., Ivanova O.
|
Том 48, № 3 (2018) |
Surface Phenomena in the Smelting Bath of an Oxygen Converter |
|
Khisamutdinov N., Yavoiskaya O., Yavoiskii A., Khisamutdinov S.
|
Том 46, № 9 (2016) |
Surface-crack formation in the manufacture of microalloyed steel pipe |
|
Kolbasnikov N., Mishin V., Shishov I., Matveev M., Korchagin A.
|
Том 46, № 7 (2016) |
Surface-crack formation in the two-phase region when rolling thick microalloyed-steel sheet |
|
Kolbasnikov N., Zotov O., Matveev M., Glukhov P., Korchagin A.
|
Том 47, № 11 (2017) |
Symmetry of Arc Furnace Operation |
|
Shurygin Y.
|
Нәтижелер 623 - 526/550 |
<< < 17 18 19 20 21 22 23 24 25 > >> |