Article

Шығарылым Атауы Файл
Том 49, № 9 (2019) Straightening of Relatively Flexible Cylindrical Parts. Part II. Stress State of the Cylinder Workpiece in Transverse Rolling between Flat Plates PDF
(Eng)
Zaides S., Le Hong Quang .
Том 49, № 9 (2019) On the Mechanism of Conglomerate Formation from Nonmetallic Inclusions Based on Al2O3–CaO–MgO System in the Production of Steel at Modern Metallurgical Complexes PDF
(Eng)
Safronov A., Dub V., Orlov V., Kosyrev K., Loskutov A., Moskovoy K.
Том 49, № 9 (2019) Possibilities of Using a Local Heat Treatment to Produce New Precision Alloys PDF
(Eng)
Pimenov E.
Том 49, № 8 (2019) Effect of Additives Introduction to Fluxes Manufactured from Ladle Electric Steel Slag PDF
(Eng)
Kozyrev N., Mikhno A., Kryukov R., Kalinogorskii A., Bashchenko L.
Том 49, № 8 (2019) Theoretical Analysis of Formation of Automobile Sheet Roughness during Temper Rolling in Shot-Blasted Rolls PDF
(Eng)
Ogarkov N., Zvyagina E., Ismagilov R.
Том 49, № 8 (2019) The Structure and Properties of a Weld-Deposited Layer onto Steel Hardox 450 Using a Boron-Containing Wire PDF
(Eng)
Ivanov Y., Gromov V., Romanov D., Klopotov A., Rubannikova Y.
Том 49, № 8 (2019) On Wear Resistance of Steel-Containing Composites under Extreme Friction Conditions PDF
(Eng)
Fadin V., Kolubaev A., Aleutdinova M.
Том 49, № 8 (2019) Thermodynamic Modeling of Isotherms of Oxygen Solubility in Liquid Metal of the Fe–Mg–Al–O System PDF
(Eng)
Mikhailov G., Samoilova O., Makrovets L., Smirnov L.
Том 49, № 8 (2019) Multivariate Estimation of the Production Time for Steel-Wire Batches by Means of Situational–Normative Models. Part 2 PDF
(Eng)
Kulakov S., Musatova A., Kadykov V.
Том 49, № 8 (2019) Gas-Dynamic Assessment of Blast-Furnace Smelting PDF
(Eng)
Lyalyuk V., Tarakanov A.
Том 49, № 8 (2019) Experimental Study of Refining and Modification of Steel with Si–Ca, Si–Sr, and Si–Ba Alloys PDF
(Eng)
Bakin I., Shaburova N., Ryabchikov I., Mizin V., Belov B., Mikhailov G., Senin A.
Том 49, № 8 (2019) Efficient Cold Rolling and Coiling Modes PDF
(Eng)
Mazur V., Timoshenko V., Prikhodko I.
Том 49, № 8 (2019) Experience in the Development of Production of Rolled Stock from Microalloyed Steels for Shipbuilding by NLMK DanSteel PDF
(Eng)
Goli-Oglu E.
Том 49, № 8 (2019) Use of the Multiple Regression Analysis for Quantitative Estimation of the Mechanical Properties of Strengthened Rebars PDF
(Eng)
Kanaev A., Reshetkina E., Kanaev A.
Том 49, № 8 (2019) Some Fundamental Issues of the Development of Electrical Steel Production Technology in Russia PDF
(Eng)
Molotilov B., Eremin G., Cheglov A., Parahin V.
Том 49, № 7 (2019) Simulating the Electrical Parameters of an AC Arc Furnace in Electrosmelting PDF
(Eng)
Dmitrievskii B., Bashkatova A.
Том 49, № 7 (2019) Assessing the Size of Phase Inclusions in Ferrochrome Alloys by Means of Ultrasound Resonance PDF
(Eng)
Berestov A., Kudryavtsev E., Martynenko S., Rod’ko I.
Том 49, № 7 (2019) Origins and Behavior of Dioxins and Furans in Zinc-Bearing Dust PDF
(Eng)
Simonyan L., Demidova N.
Том 49, № 7 (2019) Continuous Shaping of Welded Straight-Seam Pipe in the Open Stands of a Pipe-Welding System PDF
(Eng)
Samusev S., Fadeev V.
Том 49, № 7 (2019) Straightening of Relatively Flexible Cylindrical Parts. Part I. Establishing the Loading Conditions in Transverse Straightening PDF
(Eng)
Zaides S., Le Hong Quang .
Том 49, № 7 (2019) Employing Industrial Waste in Sinter and Hot-Metal Production PDF
(Eng)
Nikitin L., Dyachok N., Vashchenko A., Shentsov A., Kutran’ V.
Том 49, № 7 (2019) Electrosmelting of Rail Steel from Directly Reduced Iron PDF
(Eng)
Umanskii A., Boikov D., Kuznetsov E., Tverskoi A., Zakharova T.
Том 49, № 7 (2019) Long Coiled Reinforcement Produced by Drawing PDF
(Eng)
Fastykovskii A., Chinokalov E.
Том 49, № 7 (2019) Rail Quality Standards and Monitoring PDF
(Eng)
Polevoi E., Yunin G., Smirnov L.
Том 49, № 7 (2019) New Rail Products at AO EVRAZ ZSMK PDF
(Eng)
Polevoi E., Yunin G., Golovatenko A., Temlyantsev M.
Нәтижелер 621 - 51/75 << < 1 2 3 4 5 6 7 8 9 10 > >>