| Шығарылым |
Атауы |
Файл |
| Том 46, № 11 (2016) |
Change in the surface oxide layer of piercing-mill mandrels over time |
(Eng)
|
|
Chubukov M., Rutskii D., Zyuban N., Uskov D., Palatkina L.
|
| Том 46, № 11 (2016) |
Influence of peritectic transformation on the hardening, structure, and properties of steel castings |
(Eng)
|
|
Semenov V., Nazaratin V., Andreev V., Nuraliev F.
|
| Том 46, № 10 (2016) |
Hydraulic transmission–multiplier drive with dosing modules |
(Eng)
|
|
Pilipenko S., Baiguzin M., Potapenkov A.
|
| Том 46, № 10 (2016) |
Analysis of the properties and functions of metal components |
(Eng)
|
|
Rubin G., Chukin M., Gun G., Polyakova M.
|
| Том 46, № 10 (2016) |
Differential heat treatment of rails by means of rolling heat |
(Eng)
|
|
Polevoi E., Yunin G., Temlyantsev M.
|
| Том 46, № 10 (2016) |
Manufacture of reduced products from Kuznets Basin coal |
(Eng)
|
|
Nokhrina O., Rozhikhina I., Khodosov I.
|
| Том 46, № 10 (2016) |
Nanolayer formation during hydrodynamic instability under external stimuli |
(Eng)
|
|
Sarychev V., Gromov V., Nevskii S., Nizovskii A., Konovalov S.
|
| Том 46, № 10 (2016) |
New C–Si–Mn–Cr–V–Mo powder wires for roller surfacing |
(Eng)
|
|
Kozyrev N., Kibko N., Umanskii A., Titov D., Nikitin A.
|
| Том 46, № 10 (2016) |
Oxidation of magnetite |
(Eng)
|
|
Yur’ev B., Goltsev V.
|
| Том 46, № 10 (2016) |
Improving blast-furnace efficiency by regulating the properties of iron-ore pellets |
(Eng)
|
|
Kozub A., Panchenko A., Efendiev N., Ismagilov R., Solodukhin A., Gorbachev V., Chesnokov Y., Leont’ev L., Burtsev D.
|
| Том 46, № 10 (2016) |
Adaptive control of the ignition of sintering batch |
(Eng)
|
|
Endiyarov S.
|
| Том 46, № 10 (2016) |
Intellectual support in the structuring of batch within an arc furnace |
(Eng)
|
|
Logunova O., Sibileva N., Pavlov V.
|
| Том 46, № 10 (2016) |
Damping of vibrations in the primary drives of cold-rolling mills |
(Eng)
|
|
Kozhevnikova I., Kozhevnikov A., Sorokin G., Markushevskii N.
|
| Том 46, № 10 (2016) |
Economically alloyed high-strength steel for use in mine equipment |
(Eng)
|
|
Nikitin V., Nastich S., Smirnov L., Mal’tsev A., Denisov S., Chevskaya O., Brylin A., Kurash V., Maslyuk V., Tarasov V.
|
| Том 46, № 10 (2016) |
Influence of the mechanical anisotropy of thin steel sheets on the parameters of Lamb waves |
(Eng)
|
|
Murav’ev V., Murav’eva O., Volkova L.
|
| Том 46, № 9 (2016) |
Formation of metallic phase by passing gaseous reducing agent through multicomponent oxide melt. Part 1. Theoretical principles |
(Eng)
|
|
Vusikhis A., Leont’ev L., Chentsov V., Kudinov D., Selivanov E.
|
| Том 46, № 9 (2016) |
Thermal state of air tuyeres in blast furnaces |
(Eng)
|
|
Radyuk A., Titlyanov A., Sidorova T.
|
| Том 46, № 9 (2016) |
Influence of the temperature and strain rate on the deformability of low-alloy carbon steel |
(Eng)
|
|
Laber K., Dyja H., Kawalek A., Bogatov A., Nukhov D.
|
| Том 46, № 9 (2016) |
Influence of the packing-defect energy on the abrasive wear resistance of Fe–12Mn–1.2C steel castings cooled at different rates |
(Eng)
|
|
Vdovin K., Gorlenko D., Feoktistov N.
|
| Том 46, № 9 (2016) |
Extraction of iron from copper-plant slag |
(Eng)
|
|
Lykasov A., Ryss G., Sharafutdinov D., Pogodin A.
|
| Том 46, № 9 (2016) |
Continuous reductive smelting of steel |
(Eng)
|
|
Tleugabulov S., Abikov S., Tleugabulov B.
|
| Том 46, № 9 (2016) |
Predicting the liquidus temperature of complex nickel alloys |
(Eng)
|
|
Zubarev K., Kotel’nikov G., Titova K., Semin A., Mikhailov M.
|
| Том 46, № 9 (2016) |
Decarburization of high-chromium melts by argon–oxygen plasma |
(Eng)
|
|
Rumyantsev B., Komolova O., Grigorovich K., Garber A., Tabakov Y.
|
| Том 46, № 9 (2016) |
Corrosion resistance of high-strength austenitic chromium–nickel–manganese steel containing nitrogen |
(Eng)
|
|
Kaputkina L., Svyazhin A., Smarygina I., Bobkov T.
|
| Том 46, № 9 (2016) |
Design of new precision alloys |
(Eng)
|
|
Molotilov B., Galkin M., Kornienkov B.
|
| Нәтижелер 621 - 476/500 |
<< < 15 16 17 18 19 20 21 22 23 24 > >>
|
