Working-Stand Equipment Vibrations of Continuous Cold Rolling Mills during the Production of Thin Strip Products
- Autores: Bocharov V.1, Bocharov V.1, Bocharov D.1
-
Afiliações:
- Illich Mariupol Metallurgical Plant
- Edição: Volume 49, Nº 12 (2019)
- Páginas: 885-887
- Seção: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180951
- DOI: https://doi.org/10.3103/S0967091219120027
- ID: 180951
Citar
Resumo
The article considers the nature, occurrence mechanism and development of resonant vibrations found in the working stand equipment of cold rolling mills during the production of strips with a thickness of 0.4–0.6 mm at speeds of more than 12 m/s. Vibration causes are possibly based on changes in the metal properties during rolling due to acquired hardening and forming of internal friction peaks.
Palavras-chave
Sobre autores
V. Bocharov
Illich Mariupol Metallurgical Plant
Autor responsável pela correspondência
Email: mmgsnab@mail.ru
Ucrânia, Mariupol
V. Bocharov
Illich Mariupol Metallurgical Plant
Email: mmgsnab@mail.ru
Ucrânia, Mariupol
D. Bocharov
Illich Mariupol Metallurgical Plant
Email: mmgsnab@mail.ru
Ucrânia, Mariupol