The Improvement and Development of Hot-Rolled Strip Bar Production Technology at NUST MISiS
- Authors: Ionov S.M.1, Tatary A.S.1, Potemkin V.K.1, Tikhonov S.M.1, Sokolov P.Y.1
-
Affiliations:
- National University of Science and Technology MISiS
- Issue: Vol 49, No 12 (2019)
- Pages: 879-884
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180948
- DOI: https://doi.org/10.3103/S0967091219120040
- ID: 180948
Cite item
Abstract
This paper presents the results of the work carried out by the Department for Metal Working Processes at NUST for production technology of: high-strength automotive flat stock from bi-phase ferrite martensite steels (BPHFMS) on a broad-strip hot-rolling mill by staged laminar cooling on a runoff table, as well as K52–56 strength grade cold- and corrosion-resistant tubular strip bar. The metal’s ferrite grains rolled on the broad-strip mill are ground by combining the controlled rolling (CR) of strips with their rapid cooling (RCL). Thermal kinetic diagrams (TKDs) were created to show modeling sheet cooling, as well as to predict the resulting structure type depending on the metal cooling rate.
About the authors
S. M. Ionov
National University of Science and Technology MISiS
Author for correspondence.
Email: ionov@pdss.misis.ru
Russian Federation, Moscow, 119049
A. S. Tatary
National University of Science and Technology MISiS
Email: ionov@pdss.misis.ru
Russian Federation, Moscow, 119049
V. K. Potemkin
National University of Science and Technology MISiS
Email: ionov@pdss.misis.ru
Russian Federation, Moscow, 119049
S. M. Tikhonov
National University of Science and Technology MISiS
Email: ionov@pdss.misis.ru
Russian Federation, Moscow, 119049
P. Yu. Sokolov
National University of Science and Technology MISiS
Email: ionov@pdss.misis.ru
Russian Federation, Moscow, 119049