Email this article Influence of the Casting Conditions on the Position of the Structural Boundaries in Continuous-Cast Ingots
- Authors: Dozhdikov V.I.1, Vasyutin A.Y.2, Glotova I.O.1
-
Affiliations:
- Lipetsk State Technical University
- PAO NLMK
- Issue: Vol 49, No 5 (2019)
- Pages: 328-331
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180581
- DOI: https://doi.org/10.3103/S0967091219050048
- ID: 180581
Cite item
Open Access
Access granted
Subscription Access
Abstract
Comparison of experimental data regarding the structure of continuous-cast ingots yields complex linear regression equations for predicting the position of the boundaries between structural zones of the ingot on the basis of parameters such as the ingot thickness, the casting rate, and the carbon content in the steel.
About the authors
V. I. Dozhdikov
Lipetsk State Technical University
Email: irina0289@mail.ru
Russian Federation, Lipetsk
A. Yu. Vasyutin
PAO NLMK
Email: irina0289@mail.ru
Russian Federation, Lipetsk
I. O. Glotova
Lipetsk State Technical University
Author for correspondence.
Email: irina0289@mail.ru
Russian Federation, Lipetsk
Supplementary files
