Pulverized-coal injection in a 5000-m3 blast furnace
- Authors: Lyalyuk V.P.1, Tarakanov A.K.2, Kassim D.A.1, Pinchuk D.V.3, Otorvin P.I.3
-
Affiliations:
- Krivoy Rog Metallurgical Institute
- Ukrainian National Metallurgical Academy
- PAO Arcelor Mittal Krivoy Rog
- Issue: Vol 47, No 10 (2017)
- Pages: 675-681
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179833
- DOI: https://doi.org/10.3103/S0967091217100060
- ID: 179833
Cite item
Abstract
Numerous problems are encountered in the introduction of pulverized-coal injection at a 5000-m3 blast furnace. To resolve those problems, changes are proposed in the furnace profile, the number and diameter of the air tuyeres, the batch distribution in the mouth, and the gas flux in the hearth.
About the authors
V. P. Lyalyuk
Krivoy Rog Metallurgical Institute
Author for correspondence.
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
A. K. Tarakanov
Ukrainian National Metallurgical Academy
Email: vitalij.lyalyuk@gmail.com
Ukraine, Dnepr
D. A. Kassim
Krivoy Rog Metallurgical Institute
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
D. V. Pinchuk
PAO Arcelor Mittal Krivoy Rog
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
P. I. Otorvin
PAO Arcelor Mittal Krivoy Rog
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog