Email this article Solidification of a thick slab in a mold with supplementary cooling
- Authors: Kuklev A.V.1, Zarubin S.V.2, Gusev M.P.2,3, Longinov A.M.2,3, Tinyakov V.V.1,3
-
Affiliations:
- Bardin Central Research Institute of Ferrous Metallurgy
- Skolkovo Institute of Science and Technology
- OOO Korad
- Issue: Vol 47, No 8 (2017)
- Pages: 550-553
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179754
- DOI: https://doi.org/10.3103/S096709121708006X
- ID: 179754
Cite item
Open Access
Access granted
Subscription Access
Abstract
A model is proposed for the solidification of thick ingots with supplementary cooling by means of mandrels. On that basis, the overheating of the liquid steel in the classical system may be eliminated. The effectiveness of supplementary cooling by means of mandrels is shown in a computational experiment. The solidification rate may be significantly modified by that means.
Keywords
About the authors
A. V. Kuklev
Bardin Central Research Institute of Ferrous Metallurgy
Author for correspondence.
Email: gusev-m.p@yandex.ru
Russian Federation, Moscow
S. V. Zarubin
Skolkovo Institute of Science and Technology
Email: gusev-m.p@yandex.ru
Russian Federation, Moscow
M. P. Gusev
Skolkovo Institute of Science and Technology; OOO Korad
Email: gusev-m.p@yandex.ru
Russian Federation, Moscow; Moscow
A. M. Longinov
Skolkovo Institute of Science and Technology; OOO Korad
Email: gusev-m.p@yandex.ru
Russian Federation, Moscow; Moscow
V. V. Tinyakov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: gusev-m.p@yandex.ru
Russian Federation, Moscow; Moscow
