Control of the secondary cooling in continuous casting during nozzle replacement
- Authors: Shipulin V.A.1, Dozhdikov V.I.1, Vasyutin A.Y.2
-
Affiliations:
- Lipetsk State Tcehnical University
- PAO NLMK
- Issue: Vol 47, No 3 (2017)
- Pages: 198-200
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179434
- DOI: https://doi.org/10.3103/S0967091217030123
- ID: 179434
Cite item
Abstract
The cooling and solidification of a continuous-cast ingot in transient casting conditions are studied by simulation. The influence of the method of controlling the secondary cooling on the thermal state of the ingot is shown. Different approaches to the control of the coolant flow rates in various operations are compared.
About the authors
V. A. Shipulin
Lipetsk State Tcehnical University
Author for correspondence.
Email: shipulin_va@nlmk.com
Russian Federation, Lipetsk
V. I. Dozhdikov
Lipetsk State Tcehnical University
Email: shipulin_va@nlmk.com
Russian Federation, Lipetsk
A. Yu. Vasyutin
PAO NLMK
Email: shipulin_va@nlmk.com
Russian Federation, Lipetsk