Email this article Smelting of high-carbon ferrochrome from chromium agglomerate produced with alumina-silica flux
- Authors: Kaliakparov A.G.1, Suslov A.V.1, Nurmaganbetova B.N.2, Yaroshenko Y.G.3, Zhdanov A.V.3, Nurmaganbetov Z.O.2
-
Affiliations:
- ERG Research Center
- Satpaev Ekibastuz Engineering Institute
- Institute of Materials Science and Metallurgy
- Issue: Vol 47, No 1 (2017)
- Pages: 65-69
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179316
- DOI: https://doi.org/10.3103/S0967091217010077
- ID: 179316
Cite item
Open Access
Access granted
Subscription Access
Abstract
In a test melts, high-carbon ferrochrome is produced from chrome sinter and chrome-ore fines in an arc electrofurnace. Two types of sinter with the best performance—the best sintering rate, strength, and product yield—are studied. It is demonstrated by experimental melts that high-carbon ferrochrome can be produced from proposed agglomerates. An estimation of smelting parameters for production of high-carbon ferrochrome is made.
Keywords
About the authors
A. G. Kaliakparov
ERG Research Center
Email: avzhd@mail.ru
Kazakhstan, Aksu
A. V. Suslov
ERG Research Center
Email: avzhd@mail.ru
Kazakhstan, Aksu
B. N. Nurmaganbetova
Satpaev Ekibastuz Engineering Institute
Email: avzhd@mail.ru
Kazakhstan, Ekibastuz
Yu. G. Yaroshenko
Institute of Materials Science and Metallurgy
Author for correspondence.
Email: avzhd@mail.ru
Russian Federation, Yekaterinburg
A. V. Zhdanov
Institute of Materials Science and Metallurgy
Email: avzhd@mail.ru
Russian Federation, Yekaterinburg
Zh. O. Nurmaganbetov
Satpaev Ekibastuz Engineering Institute
Email: avzhd@mail.ru
Kazakhstan, Ekibastuz
Supplementary files
