Email this article Calculations of manganese ferroalloys production efficiency from different ores
- Authors: Zhuchkov V.I.1, Zhdanov A.V.2, Leont’ev L.I.3, Dashevskii V.Y.4
-
Affiliations:
- Institute of Metallurgy, Ural Branch
- Institute of Materials Science and Metallurgy
- Presidium of the Russian Academy of Sciences
- Baikov Institute of Metallurgy
- Issue: Vol 46, No 11 (2016)
- Pages: 814-817
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179197
- DOI: https://doi.org/10.3103/S0967091216110139
- ID: 179197
Cite item
Open Access
Access granted
Subscription Access
Abstract
The cost of producing manganese alloys by reduction from manganese ore using carbothermic process is estimated. Alternatives of FeMn78 and SiMn17 production from rich Australian manganese ore with low-phosphorus concentration or low-phosphorus manganese slag in charge mixture with poor domestic Russian ore with comparatively high phosphorus content are calculated and presented in the article. Direct production costs for alternative variants in a wide range of cherge composition are estimated.
About the authors
V. I. Zhuchkov
Institute of Metallurgy, Ural Branch
Email: avzhd@mail.ru
Russian Federation, Yekaterinburg
A. V. Zhdanov
Institute of Materials Science and Metallurgy
Author for correspondence.
Email: avzhd@mail.ru
Russian Federation, Yekaterinburg
L. I. Leont’ev
Presidium of the Russian Academy of Sciences
Email: avzhd@mail.ru
Russian Federation, Moscow
V. Ya. Dashevskii
Baikov Institute of Metallurgy
Email: avzhd@mail.ru
Russian Federation, Moscow
Supplementary files
