Reconstruction of the gas cooling and purification ducts for (350–400)-t converters
- Authors: Stalinskii D.V.1, Ryzhavskii A.Z.1, Pirogov A.Y.1, Zimoglyad A.V.1, Yudin A.V.2, Slutskii V.V.2
-
Affiliations:
- Energostal’ Ukrainian Scientific Technical Center
- OOO ITTs Rosenergostal’
- Issue: Vol 46, No 4 (2016)
- Pages: 295-300
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/178687
- DOI: https://doi.org/10.3103/S096709121604015X
- ID: 178687
Cite item
Abstract
On the basis of experience at numerous modernized steel plants between 2006 and 2015, proposals have been developed for the reconstruction of the gas cooling and cleaning ducts for (350–400)-t converters, as an alternative to the system employed by Primetals Technologies Austria (previously Siemens Voest Alpine). The basic equipment employed in the reconstruction may be manufactured at Russian plants, and its introduction requires minimal reconfiguration of the metal structures in the existing converter shop.
About the authors
D. V. Stalinskii
Energostal’ Ukrainian Scientific Technical Center
Author for correspondence.
Email: onti@energostal.kharkov.ua
Ukraine, Kharkov
A. Z. Ryzhavskii
Energostal’ Ukrainian Scientific Technical Center
Email: onti@energostal.kharkov.ua
Ukraine, Kharkov
A. Yu. Pirogov
Energostal’ Ukrainian Scientific Technical Center
Email: onti@energostal.kharkov.ua
Ukraine, Kharkov
A. V. Zimoglyad
Energostal’ Ukrainian Scientific Technical Center
Email: onti@energostal.kharkov.ua
Ukraine, Kharkov
A. V. Yudin
OOO ITTs Rosenergostal’
Email: onti@energostal.kharkov.ua
Russian Federation, Belgorod
V. V. Slutskii
OOO ITTs Rosenergostal’
Email: onti@energostal.kharkov.ua
Russian Federation, Belgorod