Production of seamless pipe in a pilger mill with new groove configurations
- Authors: Osadchii V.Y.1, Saf’yanov A.V.2, Burakov A.P.2, Nikitin K.N.2, Kolikov A.P.3, Danovskii N.G.4, Bubnov K.E.2
-
Affiliations:
- Moscow State University of Instrument Design and Information Science
- OAO ChTPZ
- Moscow Institute of Steel and Alloys
- ZAO TKF Prommet-Splav
- Issue: Vol 46, No 2 (2016)
- Pages: 144-149
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/178583
- DOI: https://doi.org/10.3103/S096709121602011X
- ID: 178583
Cite item
Abstract
New groove configurations for the pilger mill reduce the nonuniformity of sleeve deformation on transition from the striker to the polishing section and enhance pipe quality. The rolling of 08X18H10Tsteel-Ш pipe blanks (produced by electroslag remelting) by the new method to obtain intermediate pipes is considered. Machining of the intermediate pipes—boring and turning—produces commercial pipe of diameter 530 and 630 mm corresponding to Technical Specifications TU 14-3R-197–2001.
About the authors
V. Ya. Osadchii
Moscow State University of Instrument Design and Information Science
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Moscow
A. V. Saf’yanov
OAO ChTPZ
Author for correspondence.
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Chelyabinsk
A. P. Burakov
OAO ChTPZ
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Chelyabinsk
K. N. Nikitin
OAO ChTPZ
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Chelyabinsk
A. P. Kolikov
Moscow Institute of Steel and Alloys
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Moscow
N. G. Danovskii
ZAO TKF Prommet-Splav
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Chelyabinsk
K. E. Bubnov
OAO ChTPZ
Email: Anatoliy.Safyanov@chelpipe.ru
Russian Federation, Chelyabinsk