


Volume 24, Nº 3 (2016)
- Ano: 2016
- Artigos: 4
- URL: https://journals.rcsi.science/0869-5911/issue/view/10962
Article
Experimental study of amphibole interaction with H2O–NaCl Fluid at 900°C, 500 MPa: toward granulite facies melting and mass transfer
Resumo
Interaction between natural pargasite [Prg, SiO2 = 43.89 wt %, FeO/(FeO + MgO) = 0.35, (Na + K)A = 0.51] and H2O–NaCl fluid, whose composition (NaCl mole fraction) varied within the range XNaCl = NaCl/(NaCl + H2O) = 0–0.45, was experimentally studied in an internally heated apparatus at 900°C and 500 MPa. Natural pargasite begins to melt at a temperature 120–150°C lower than its synthetic analogue. In the presence of pure H2O, the subliquidus mineral assemblage involves amphibole Hbl1, whose composition is closely similar to the starting Prg, clinopyroxene Cpx, calcic plagioclase Pl, and minor amounts of hercynite-magnetite spinel. With increasing XNaCl, the subliquidus assemblage systematically changed: calcic plagioclase disappeared and more Fe- rich amphibole Hbl2 appeared at XNaCl = 0.07; Cpx disappeared at XNaCl = 0.14; and appearance of Na-Phl compositionally close to wonesite and almost complete disappearance of Hbl1 was observed at XNaCl = 0.31. The composition of the melt also changed: its Na2O gradually increased (from 1.5 to 9–10 wt %), and CaO and SiO2 decreased(from 8.6 to 2 wt % and from 64 to 60 wt %, respectively, in recalculation to the anhydrous basis); at XNaCl ≥ 0.35, the melt was transformed from quartz- to nepheline-normative. The maximum Cl concentration of 1.2 wt % was measured in the melt poorest in SiO2. The experimental products contained spherical objects less than 10 μm in diameter that consisted of material that precipitated from the quenched fluid. These particles are richer than the melt in SiO2 (62–80 wt %) and poorer in Al2O3 (11–19 wt %) in experiments with XNaCl ≤ 0.24, but the differences between the compositions of the melt and particles decreased with increasing XNaCl. The relatively high concentrations of aluminosilicate material in the fluid is most likely explained by the high solubility of the melt in the fluid phase, with the formation in the fluid aqueous Si, Al–Si, Na–Al–Si, and other polymeric species. It is suggested that interaction of host rocks with such fluids, rich in granitic components, might be responsible for granitization (charnockitization) of mafic, and, particularly, ultramafic rocks described in the literature.



Late Pleistocene Tendürek Volcano (Eastern Anatolia, Turkey). II. Geochemistry and petrogenesis of the rocks
Resumo
The series of two papers presents a comprehensive isotope-geochronological and petrologicalgeochemical study of the Late Quaternary Tendürek Volcano (Eastern Turkey), one of the greatest volcanoes within the Caucasian–Eastern Anatolian segment of the Alpine foldbelt. The second article discusses the results of petrogenetic modeling, role of AFC-processes in the petrogenesis of magmas and the nature of mantle source of the Tendürek Volcano. Based on geochronological data, geochemical and isotopegeochemical (Sr-Nd-Pb) characteristics of the studied rocks we suggest the petrological model which well describe the evolution of magmatic system of the Tendürek Volcano during the whole period of its activity. The data obtained indicate that the igneous rocks of the Tendürek Volcano belong to the same homodromous volcanic series (trachybasalt–tephrite–phonotephrite–tephriphonolite–trachyandesite–trachyte–phonolite), which are dominated by the intermediate and moderately-acid varieties of the eruption products. The leading role in the petrogenesis of the lavas was played by the fractional crystallization processes, which, according to isotope-geochemical data, were sometimes complicated by the assimilation of upper crustal material. The mantle reservoir responsible for the magmatic activity within the major part of the Eastern Anatolia in the Late Quaternary time was represented by the OIB-type mantle. It was subject to slight metasomatic changes as a result of earlier deepening and remelting of the Arabian Plate slab, which was subducted under the region through the end of the Miocene. The depth of the magma-generating source is estimated at around 80 km, which corresponds to the upper part of the asthenospheric wedge under the region, based on geophysical data.



New carbonatite complex in the western Baikal area, southern Siberian craton: Mineralogy, age, geochemistry, and petrogenesis
Resumo
A dike–vein complex of potassic type of alkalinity recently discovered in the Baikal ledge, western Baikal area, southern Siberian craton, includes calcite and dolomite–ankerite carbonatites, silicate-bearing carbonatite, phlogopite metapicrite, and phoscorite. The most reliable 40Ar–39Ar dating of the rocks on magnesioriebeckite from alkaline metasomatite at contact with carbonatite yields a statistically significant plateau age of 1017.4 ± 3.2 Ma. The carbonatite is characterized by elevated SiO2 concentrations and is rich in K2O (K2O/Na2O ratio is 21 on average for the calcite carbonatite and 2.5 for the dolomite–ankerite carbonatite), TiO2, P2O5 (up to 9 wt %), REE (up to 3300 ppm), Nb (up to 400 ppm), Zr (up to 800 ppm), Fe, Cr, V, Ni, and Co at relatively low Sr concentrations. Both the metapicrite and the carbonatite are hundreds of times or even more enriched in Ta, Nb, K, and LREE relative to the mantle and are tens of times richer in Rb, Ba, Zr, Hf, and Ti. The high (Gd/Yb)CN ratios of the metapicrite (4.5–11) and carbonatite (4.5–17) testify that their source contained residual garnet, and the high K2O/Na2O ratios of the metapicrite (9–15) and carbonatite suggest that the source also contained phlogopite. The Nd isotopic ratios of the carbonatite suggest that the mantle source of the carbonatite was mildly depleted and similar to an average OIB source. The carbonatites of various mineral composition are believed to be formed via the crystallization differentiation of ferrocarbonatite melt, which segregated from ultramafic alkaline melt.



Prospects of the method of stepwise crushing as a source of information on the fluid phase of rocks and minerals
Resumo
This paper illustrates opportunities provided by the method of stepwise crushing for the investigation of the fluid phase of geologic objects. Owing to the efficient separation of gases from fluid inclusions of different generations trapped during mineral growth and/or subsequent alteration (metasomatic and hydrothermal), stepwise crushing allows us to obtain the isotopic characteristics of end-members and, thus, reliably establish the source and evolution of fluids in magmatic and postmagmatic processes; this method provides clues to a better understanding of interaction of global reservoirs, such as the mantle, crust, and atmosphere. The importance of information obtained by this method is exemplified here by the results of the investigation of mantle rocks and minerals from various geologic environments (MORB, SCLM, and carbonated mantle). It was shown that the multi-isotope approach yields most comprehensive data on the genetic features and evolution of the fluid phase. The importance of combining isotope geochemical and microthermometric fluid inclusion data is demonstrated by the example of a mantle xenolith of garnet lherzolite from the Jetty Oasis. Together with the microthermometric investigation of fluid inclusions and developing laser techniques for opening of individual inclusions, the method of stepwise crushing provides a means for solving one of the most important practical problems—obtaining information on the geochemical features and physicochemical parameters of mineral-forming (and ore-forming) processes.


