TUGOPLAVKIE INTERMETALLIDY MOLIBDENA, NIOBIYa, KhROMA — OSNOVA NOVYKh ZhAROPROChNYKh KOMPOZITOV (OBZOR)

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Эффективность газотурбинных двигателей (ГТД) напрямую связана с повышением температуры рабочего газа и, следовательно, рабочих температур во всех контурах установки. Интенсивное развитие инженерии ГТД требует разработки жаропрочных конструкционных материалов нового поколения, способных превзойти по жаропрочности современные никелевые суперсплавы. В качестве потенциальных кандидатов рассмотрены современные тугоплавкие интерметаллиды, такие как Nb3Al, Mo3Si, Mo3Al, Nb5Si3, Cr2Ta и др. Несмотря на высокую жаростойкость и жаропрочность, данные фазы обладают низкой трещиностойкостью даже при высоких температурах, в свете чего возникает необходимость в создании композитных структур, таких как интерметаллид + твердый раствор. Проведен сравнительный анализ механических свойств и жаростойкости композиционных структур интерметаллид + металлическая матрица. Более подробно рассмотрена система Cr-Cr2Ta, которая обладает высокой жаростойкостью, что дает предпосылки для создания жаропрочных сплавов нового поколения для замены существующих никелевых суперсплавов. Отмечено, что порошковая металлургия представляет собой конкурентоспособную технологию по сравнению с методами литья. В частности, представлены данные о современном состоянии в области металлотермического синтеза тугоплавких интерметаллидов.

Bibliografia

  1. Каблов, Е.Н. Инновационные разработки ФГУП «ВИАМ» ГНЦ РФ по реализации «Стратегических направлений развития материалов и технологий их переработки на период до 2030 года» / Е.Н. Каблов // Авиац. матер. и технол. 2015. №1. С.3—33.
  2. Поварова, К.Б. Конструкционные жаропрочные сплавы на основе Nb3Al : получение, структура и свойства / К.Б. Поварова, О.А. Базылева, А.А. Дроздов, Н.К. Казанская, А.Е. Морозов, М.А. Самсонова // Материаловедение. 2011. №4. С.39—48.
  3. Бондаренко, Ю.А. Направленная кристаллизация, структура и свойства естественного композита на основе эвтектики Nb-Si на рабочие температуры до 1350 °C для лопаток ГТД / Ю.А. Бондаренко, М.Ю. Колодяжный, А.Б. Ечин, А.Р. Нарский // Тр. ВИАМ. 2018. №1. С.3—14.
  4. Каблов, Е.Н. Высокотемпературные композиты на основе системы Nb-Si, армированные силицидами ниобия / Е.Н. Каблов, И.Л. Светлов, М.И. Карпов, А.В. Нейман, П.Г. Мин, Ф.Н. Карачевцев // Материаловедение. 2017. №2. С.24—32.
  5. Светлов, И.Л. Жаропрочные боросиликатные сплавы молибдена, упрочненные карбидами титана. МоSi-B-TiC (обзор) / И.Л. Светлов, О.Г. Оспенникова, М.И. Карпов, Ю.В. Артеменко // Материаловедение. 2020. №9. С.16—33.
  6. Каблов, Е.Н. Перспективы создания высокотемпературных жаропрочных сплавов на основе тугоплавких матриц и естественных композитов / Е.Н.
  7. Каблов, Ю.А. Бондаренко, М.Ю. Колодяжный, В.А. Сурова, А.Р. Нарский // Вопр. материаловедения. 2020. №4. С.64—78.
  8. Бондаренко, Ю.А. Исследования по созданию высокотемпературных жаропрочных сплавов на основе тугоплавких матриц и естественных композитов / Ю.А. Бондаренко, М.Ю. Колодяжный, В.А. Суворова // Персп. матер. 2021. №2. С.5—16.
  9. Perepezko, J.H. The hotter the engine, the better / J.H. Perepezko // Science. 2009. V.326. P.1068— 1069.
  10. Дмитриева, В.В. Исследование микроструктуры и физико-механических свойств порошковых композиционных материалов на основе молибденовой матрицы, полученной методом искрового плазменного спекания (SPS) / В.В. Дмитриева, Н.В. Севостьянов, Н.П. Бурковская, Ф.Н. Карачевцев, Р.М. Назаркин, Н.С. Моисеева, И.Ю. Ефимочкин // Материаловедение. 2020. №10. С.3—10.
  11. Okamoto, H. Mo-Si (Molybdenum-Silicon) / H. Okamoto // J. Phase Equilibria Diffus. 2011. V.32. P.176.
  12. Rosales, I. Stoichiometry and mechanical properties of Mo3Si / I. Rosales, J.H. Schneibel // Intermetallics. 2000. V.8. P.885—889.
  13. Meyer, M.K. Oxidation behavior of boron-modified Mo5Si3 at 800—1300 °C / M.K. Meyer, M. Akinc // J. Amer. Ceram. Soc. 1996. V.79. P.938—944.
  14. Patent US5, 595,616A. Method for enhancing the oxidation resistance of a molybdenum alloy, and a method of making a molybdenum alloy / D.M. Berczik, 1997. Jan. 21.
  15. Meyer, M.K. Oxide scale formation and isothermal oxidation behavior of Mo-Si-B intermetallics at 600—1000 °C / M.K. Meyer, A.J. Thom, M. Akinc // Intermetallics. 1999. V.7. P.153—162.
  16. Yoshimi, K. Oxidation behavior of Mo5SiB2-based alloy at elevated temperatures / K. Yoshimi, S. Nakatani, T. Suda, S. Hanada, H. Habazaki // Intermetallics. 2002. V.10. P.407—414.
  17. Hayashi, T. Creep of single crystalline and polycrystalline T2 phase in the Mo-Si-B system / T. Hayashi, K. Ito, K. Ihara, M. Fujikura, M. Yamaguchi // Intermetallics. 2004. V.12. P.699—704.
  18. Inui, H. Creep deformation of single crystals of binary and some ternary MoSi2 with the C11b structure / H. Inui, K. Ishikawa, M. Yamaguchi // Intermetallics. 2000. V.8. P.1159—1168.
  19. Mason, D.P. On the creep of directionally solidified MoSi2-Mo5Si3 eutectics / D.P. Mason, D.C. Van Aken // Acta Metall. Mater. 1995. V.43. P.1201—1210.
  20. Umakoshi, Y. High temperature silicides and refractory alloys / Y. Umakoshi, T. Nakashima, T. Nakano, E. Yanagisawa // MRS (Mater. Rex. Soc.) Symp. Proc. 1994. V.322. P.9.
  21. Sadananda, K. Creep and fatigue properties of high temperature silicides and their composites / K. Sadananda, C.R. Feng, R. Mitra, S.C. Deevi // Mater. Sci. Eng. A. 1999. V.261. P.223—238.
  22. Kauss, O. Temperature resistance of Mo3Si : Phase stability, microhardness, and creep properties / O. Kauss, S. Obert, I. Bogomol, T. Wablat, N. Siemensmeyer, K. Naumenko, M. Krüger // Metals (Basel). 2021. V.11. P.564.
  23. Chu, F. Synthesis and properties of Mo5Si3 single crystals / F. Chu, D.J. Thoma, K. McClellan, P. Peralta, Y. He // Intermetallics. 1999. V.7. P.611—620.
  24. Carter, D.H. SiC-MoSi2 composites / D.H. Carter, J.J. Petrovic, R.E. Honneu, W.S. Gibbs // Ceram. Eng. Sci. 1989. V.10. P.1121—1129.
  25. Petrovic, J.J. Partially stabilized ZrO2 particle-MoSi2 matrix composites / J.J. Petrovic, R.E. Honnell // J. Mater. Sci. 1990. V.25. P.4453—4456.
  26. Misra, A. Microstructures and mechanical properties of a Mo3Si-Mo5Si3 composite / A. Misra, J.J. Petrovic, T.E. Mitchell // Scr. Mater. 1998. V.40. P.191—196.
  27. Choe, H. Ambient to high temperature fracture toughness and fatigue-crack propagation behavior in a Mo-12Si-8,5B (at.%) intermetallic / H. Choe, D. Chen, J.H. Schneibel, R.O. Ritchie // Intermetallics. 2001. V.9. P.319—329.
  28. Schneibel, J.H. Processing and mechanical properties of a molybdenum silicide with the composition M.. o-.1. 2Si-8,5B (at.%) / J.H. Schneibel, M.J. Kramer, O. Unal, R.N. Wright // Intermetallics. 2001. V.9. P.25—31.
  29. Kruzic, J.J. Fracture and fatigue resistance of MoSi-B alloys for ultrahigh-temperature structural applications / J.J. Kruzic, J.H. Schneibel, R.O. Ritchie // Scr. Mater. 2004. V.50. P.459—464.
  30. Nieh, T.G. Deformation of a multi phase Mo-9,4Si13,8B alloy at elevated temperatures / T.G. Nieh, J.G. Wang, C.T. Liu // Intermetallics. 2001. V.9. P.73—79.
  31. Yu, J.L. Tensile properties of multi phase Mo-Si-B refractory alloys at elevated temperatures / J.L. Yu, Z.K. Li, X. Zheng, J.J. Zhang, H. Liu, R. Bai, H. Wang // Mater. Sci. Eng. A. 2012. V.532. P.392—395.
  32. Schneibel, J.H. High temperature strength of MoMo3Si-Mo5SiB2 molybdenum silicides / J.H. Schneibel // Intermetallics. 2003. V.11. P.625—632.
  33. Pan, Y. Influence of Mo concentration on the structure, mechanical and thermodynamic properties of Mo–Al compounds from first-princi ples calculations / Y. Pan, D. Pu, G. Liu // Vacuum. 2020. V.175. Art.109291.
  34. Sakly, A. Nanostructured Mo3Al-based composites strengthened by Al2O3 preci pitates / A. Sakly, J. Costa, B. Trindade, J. V. Fernandes, T. Benameur // J. Alloys Compd. 2010. V.502. P.480—487.
  35. Eumann, M. Alloys based on Fe3Al or FeAl with strengthening Mo3Al preci pitates / M. Eumann,M. Palm, G. Sauthoff // Intermetallics. 2004. V.12. P.625—633.
  36. Anton, D.L. High temperature properties of refractory / D.L. Anton, E. Hartfor, D.M. Shah, E. Hartford // Intermetallics, MRS Proc. 1990. V.213. P.733—738.
  37. Gu, Y. Microstructure and deformation behavior of Ir-Nb two-phase refractory superalloys for various Nb content / Y. Gu, Y. Yamabe-Mitarai, Y. Ro, H. Harada // Scr. Mater. 1999. V.40. P.1313—1319.
  38. Intermetallic compounds. Structural applications of intermetallic compounds / ed. by J.H. Westbrook, R.L. Fleischer. — N.Y. : John Wiley & Sons, 2000. 346 p.
  39. Ouyang, G. Design of refractory multi-princi pal-element alloys for high-temperature applications / G. Ouyang, P. Singh, R. Su, D.D. Johnson, J.M. Kramer, J.H. Perepezko, O.N. Senkov, D. Miracle, J. Cui // J. Comput. Mater. 2023. V.9. Art.141.
  40. Stepanov, N.D. An AlNbTiVZr0,5 high-entropy alloy combining high specific strength and good ductility / N.D. Stepanov, N.Y. Yurchenko, V.S. Sokolovsky, M.A. Tikhonovsky, G.A. Salishchev // Mater. Lett. 2015. V.161. P.136—139.
  41. Лякишев Н.П. Диаграммы состояния двойных металлических систем : справочник : в 3 т. Т.1 / под общ. ред. Н.П. Лякишева. — М. : Машиностроение, 1996. 992 с.
  42. Dimiduk, D.M. Development of intermetallic materials for aerospace systems / D.M. Dimiduk, D.B. Miracle, C.H. Ward // Mater. Sci. Technol. (United Kingdom). 1992. V.8. P.367—375.
  43. Anton, D.L. High tempeature ordered compounds for advanced aero-propulsion applications / D.L. Anton, D.M. Shah // MRS Proc. 1988. V.133. P.361—371.
  44. Hanada, S. High-temperature deformation of Nb3Al alloys / S. Hanada, Y. Murayama, Y. Abe // Intermetallics. 1994. V.2. P.155—165.
  45. Murayama, Y. Dissociated dislocations in deformed Nb3Al produced from alloy powder / Y. Murayama, S. Hanada, K. Obara, K. Hiraga // Philos. Mag. A. 1993. V.67. P.251—260.
  46. Marieb, T.N. High-temperature deformation of Nb18Al / T.N. Marieb, A.D. Kaiser, S.R. Nutt, D.L. Anton, D.M. Shah // MRS Proc. 1990. V.213. P.329—336.
  47. Pope, D.P. High-temperature applications of intermetallic compounds / D.P. Pope, R. Darolia // MRS Bull. 1996. V.21. P.30—36.
  48. Okabe, T.H. A fundamental study on the preparation of niobium aluminide powders by calciothermic reduction / T.H. Okabe, K. Fujiwara, T. Oishi, K. Ono // Metall. Trans. B. 1992. V.23. P.415—421.
  49. Murayama, Y. Processing and high temperature deformation of Nb3Al / Y. Murayama, T. Kumagai, S. Hanada // MRS. Proc. 1993. V.288. P.95—106.
  50. Hanada, S. Superplasticity in Nb3Al/Nb in situ composites / S. Hanada, W. Fang // MRS. Proc. 1999. V.601. P.15—23.
  51. Murayama, Y. Solid solution hardening of Nb3Al alloys containing tungsten, molybdenum and tantalum / Y. Murayama, S. Kanada // Scr. Mater. 1997. V.37. P.949—953.
  52. Murugesh, L. Powder processing of ductile-phasetoughened Nb-Nb3Al in situ composites / L. Murugesh, K.T. Venkateswara Rao, R.O. Ritchie // Mater. Sci. Eng. A. 1994. V.189. P.201—208.
  53. Hanada, S. Toughness of Nb3Al/Nbss in situ composites / S. Hanada, T. Tabaru, E. Miura, R. Gnanamoorthy, Y. Murayama // Intern. Conf. Thermomechanical Proces. Steels & Other Mater. (THER-MEC97). 1997. P.1583—1588.
  54. Slining, J.R. Solid solution strengthening of high purity niobium alloys / J.R. Slining, D.A. Koss // Metall. Trans. 1973. V.4. P.1261—1264.
  55. Tabaru, T. Processing and properties of Nb3Al alloys / T. Tabaru, R. Gnanamoorthy // Acta Metall. Sin. Ser. Phys. Metall. Mater. Sci. 1995. V.8. P.477—487.
  56. Jorda, J.L. New metallurgical investigation of the niobium-aluminium system / J.L. Jorda, R. Flukiger, J. Muller // J. Less-Common Met. 1980. V.75. P.227—239.
  57. Kohr, J.G. Metallurgical considerations for optimizing the superconducting properties of Nb3Al / J.G. Kohr, T.W. Eagar, R.M. Rose // Metall. Trans. 1972. V.3. P.1177—1182.
  58. Маслов, В.М. Горение систем ниобий-алюминий, ниобий-германий / В.М. Маслов, И.П. Боровинская, М.Х. Зиатдинов // Физика горения и взрыва. 1979. Т.15. №1. С.49—57.
  59. Milanese, C. Ignition and reaction mechanism of CoAl and Nb-Al intermetallic compounds prepared by combustion synthesis / C. Milanese, F. Maglia, A. Tacca, U. Anselmi-Tamburini, C. Zanotti, P. Giuliani // J. Alloys Compd. 2006. V.421. P.156—162.
  60. Письменская, Е.Б. Макрокинетика теплового взрыва в системе ниобий-алюминий. I. Основные макрокинетические стадии / Е.Б. Письменская, А.С. Рогачёв, С.Г. Бахтамов, Н.В. Сачкова // Физика горения и взрыва. 2000. Т.36. №2. С.40—44.
  61. Письменская, Е.Б. Макрокинетика теплового взрыва в системе ниобий-алюминий. II. Динамика фазообразования / Е.Б. Письменская, А.С. Рогачёв, В.И. Пономарев // Физика горения и взрыва. 2000. Т.36. №2. С.45–50.
  62. Yeh, C.L. Effects of sample stoichiometry of thermitebased SHS reactions on formation of Nb-Al intermetallics / C.L. Yeh, H.J. Wang // J. Alloys Compd. 2009. V.485. P.280—284.
  63. Gauthier, V. Synthesis of niobium aluminides using mechanically activated self-propagating high-temperature synthesis and mechanically activated annealing process / V. Gauthier, C. Josse, F. Bernard, E. Gaffet, J.P. Larpin // Mater. Sci. Eng. A. 1999. V.265. P.117—128.
  64. Hafs, A. Superconducting Nb3Al by combustion synthesis : Structural characterization / A. Hafs, A. Benaldjia, T. Hafs // Int. J. Self-Propagating HighTemperature Synth. 2016. V.25. P.159—165.
  65. Kim, H.S. Structural evolution during mechanical alloying and annealing of a Nb-25at%Al alloy / H.S. Kim, D. Kum, S. Hanada // J. Mater. Sci. 2000. V.35. P.235—239.
  66. Peng, Z. Mechanical alloying of Nb-Al powders / Z. Peng, C. Suryanarayana, F.H. (Sam) Froes // Metall. Mater. Trans. A. 1996. V.27. P.41—48.
  67. Radishevskaya, N.I. Effect of mechanochemical processing on the oxidation of 3Nb + Al mixtures / N.I. Radishevskaya, L.A. Egorova, Y.S. Naiborodenko, N.G. Kasatskii, O.K. Lepakova // Inorg. Mater. 2003. V.39. P.1288—1291.
  68. Wada, T. High temperature deformation of Nb3Al/ Nb alloys / T. Wada, K. Hongo, W.Y. Kim, D.W. Kum, S. Hanada // Mater. Sci. Forum. 1997. V.233—234. P.311—320.
  69. Dymek, S. Synthesis and characterization of mechanically alloyed Nb3Al-base alloys / S. Dymek, M. Dollar, K. Leonard // Mater. Sci. Eng. A. 1997. V.239—240. P.507—514.
  70. Dollár, A. Microstructure and high temperature mechanical properties of mechanically alloyed Nb3Albased materials / A. Dollár, S. Dymek // Intermetallics. 2003. V.11 P.341—349.
  71. Rock, C. Detailed phase analysis of a 77 at.%Nb-Al system prepared by low-energy ball milling / C. Rock, K. Okazaki // Nanostructured Mater. 1995. V.5. P.643—656.
  72. Логачева, А.И. Метод механохимического синтеза для создания нанокристаллических Nb-Al сплавов / А.И. Логачева, А.В. Логунов, И.М. Разумовский // ФММ. 2004. Т.97. №2. С.79—84.
  73. Tracy, M.J. Nanophase structure in Nb rich — Nb3Al alloy by mechanical alloying / M.J. Tracy, J.R. Groza // Nanostructured Mater. 1992. V.1. P.369—378.
  74. Chen, Y. Preparation of Nb3Al by high-energy ball milling and superconductivity / Y. Chen, Z. Liu, P. Li, X. Zhang, S. Yang, D. Yang, L. Du, Y. Cui, X. Pan, G. Yan, Y. Zhao // J. Phys. Conf. Ser. 2014. V.507. Art.012006.
  75. Hellstern, E. Phase formation in mechanically alloyed Nb-Al powders / E. Hellstern, L. Schultz, R. Bormann, D. Lee // Appl. Phys. Lett. 1988. V.53. P.1399—1401.
  76. Karpov, M.I. Structure and properties of Nb-Al alloys prepared by powder metallurgy / M.I. Karpov, V.P. Korzhov, D. V. Prokhorov, V.I. Vnukov, V.M. Kiiko, A.N. Tolstun, Y.R. Kolobov, E.V. Golosov // Russ. Metall. 2013. №4. P.251—255.
  77. Sina, H. Studies on the formation of aluminides in heated Nb-Al powder mixtures / H. Sina, S. Iyengar // J. Alloys Compd. 2015. V.628. P.9—19.
  78. Barmak, K. Phase formation sequence for the reaction of multilayer thin films of Nb/Al / K. Barmak, K.R. Coffey, D.A. Rudman, S. Foner // J. Appl. Phys. 1990. V.67. P.7313—7322.
  79. Abe, Y. Fabrication and high temperature strength of Nb3Al by a modified reactive sintering process / Y. Abe, S. Saito, S. Hanada // Mater. Manuf. Process. 1995. V.10. P.1153—1167.
  80. Nishimoto, A. Preparation of homogeneous Nb-Al intermetallic compound sheet by multi-layered rolling and subsequent heat treatment / A. Nishimoto, K. Akamatsu // Mater. Sci. Forum. 2010. V.638—642. P.1390—1393.
  81. Gavaler, J.R. Formation of the A15 phase in thinfilm Nb-Al diffusion couples / J.R. Gavaler, A.I. Braginski, J. Greggi, K. Schulze // J. Appl. Phys. 1987. V.61. P.659—669.
  82. Коржов, В.П. Сверхпроводящие свойства Nb3Al, полученного в широком температурном интервале в многослойной композитной Nb/Al-ленте / В.П. Коржов // Материаловедение. 2011. №11. С.28—34.
  83. Ramos, A.S. The effect of excess aluminum on the composition and microstructure of Nb-Al alloys produced by aluminothermic reduction of Nb2O5 / A.S. Ramos, C.A. Nunes // J. Mater. Synth. Process. 1999. V.7. P.297—301.
  84. Juneja, J.M. Preparation of niobium-aluminium alloys by aluminothermic reduction of Nb2O5 / J.M. Juneja // High Temp. Mater. Process. 2005. V.24. P.1—6.
  85. Мансурова, А.Н. Фазовые превращения при взаимодействии Nb2O5 и FeNb2O6 с алюминием / А.Н. Мансурова, В.М. Чумарев, Л.И. Леонтьев, Р.И. Гуляева, Н.И. Сельменских // Металлы. 2012. №6. С.15—21.
  86. De Lazzari, C.P. Kinetics of the non-isothermal reduction of Nb2O5 with aluminium / C.P. De Lazzari, O.M. Cintho, J.D.T. Capocchi // ISIJ Intern. 2005. V.45. P.19—22.
  87. Wang, N. Direct synthesis of Nb-Al intermetallic nanoparticles by sodiothermic homogeneous reduction in molten salts / N. Wang, C. Du, J. Hou, Y. Zhang, K. Huang, S. Jiao, H. Zhu // Intermetallics. 2013. V.43. P.45—52.
  88. Du, C. Production of intermetallic compound powders through hydrogen and sodium reduction of chlorides / C. Du, N. Wang, J. Zhu, S. Jiao, H. Zhu // Mineral Proc. Extractive Metallurgy. 2013. V.122. P.219—222.
  89. Wang, N. Preparation of Nb3Al powder by chemical reaction in molten salts / N. Wang, C.Y. Huang, Y. Zhang, H.M. Zhu // Rare Met. 2022. V.41. P.1671— 1676.
  90. Du, C. Facile synthesis of Nb-Al alloy powders via sodiothermic reduction in molten salts / C. Du, N. Wang, J. Hou, S. Jiao, H. Zhu // J. Alloys Compd. 2013. V.555. P.405—411.
  91. Kusaka, K. Ceramic mold-hi p processing of Nb-Al intermetallic powder / K. Kusaka, M. Fujine, H. Endo // Mater. Trans. JIM. 1996. V.37. P.828—834.
  92. Kusaka, K. Mechanical properties of Nb3Al-base intermetallics prepared by a Ceramic Mold-HIP process / K. Kusaka, M. Fujine, M. Okabe, H. Endo // Mater. Trans. JIM. 1999. V.40. P.571—577.
  93. Jackson, M.R. High-temperature refractory metalintermetallic composites / M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, H.A. Li psitt // JOM. 1996. V.48. P.39—44.
  94. Qiao, Y. Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys / Y. Qiao, X. Guo, Y. Zeng // Intermetallics. 2017. V.88. P.19—27.
  95. Guo, Y. Simultaneous improvement in fracture toughness and oxidation resistance of Nb-Si based alloys by vanadium addition / Y. Guo, L. Jia, B. Kong, H. Zhang, H. Zhang // Mater. Sci. Eng. A. 2017. V.701. P.149—157.
  96. Kang, Y. Microstructure and mechanical properties of Nb-Ti-Si-Al-Hf-xCr-yV multi-element in situ composite / Y. Kang, S. Qu, J. Song, Q. Huang, Y. Han // Mater. Sci. Eng. A. 2012. V.534. P.323—328.
  97. Tian, Y.X. Microstructure and room temperature fracture toughness of cast Nbss/silicides composites alloyed with Hf / Y.X. Tian, J.T. Guo, L.Z. Zhou, G.M. Cheng, H.Q. Ye // Mater. Lett. 2008. V.62. P.2657—2660.
  98. Sekido, N. Fracture toughness and high temperature strength of unidirectionally solidified Nb-Si binary and Nb-Ti-Si ternary alloys / N. Sekido, Y. Kimura, S. Miura, F.G. Wei, Y. Mishima // J. Alloys Compd. 2006. V.425. P.223—229.
  99. Guo, H. Microstructure evolution and room temperature fracture toughness of an integrally directionally solidified Nb-Ti-Si based ultrahigh temperature alloy / H. Guo,X. Guo // Scri pta Materialia. 2011. V.64. P.637—640.
  100. Sun, Z. Effects of B and Si on the fracture toughness of the Nb-Si alloys / Z. Sun, X. Guo, X. Tian, L. Zhou // Intermetallics. V.54. P.143—147.
  101. Sha, J. Mechanical properties of as-cast and directionally solidified Nb-Mo-W-Ti-Si in-situ composites at high temperatures / J. Sha, H. Hirai, T. Tabaru, Kitahara, H. Ueno, S. Hanada // Metall. Mater. Trans. A. 2003. V.34. P.85—94.
  102. Su, L. Improvement in the oxidation resistance of NbTi-Si-Cr-Al-Hf alloys containing alloyed Ge and B / L. Su, L. Jia, J. Weng, Z. Hong, C. Zhou, H. Zhang // Corros. Sci. 2014. V.88. P.460—465.
  103. Zhang, S. Effects of B addition on the microstructure and properties of Nb silicide based ultrahigh temperature alloys / S. Zhang, X. Guo // Intermetallics. 2015. V.57. P.83—92.
  104. Zhang, S. Alloying effects on the microstructure and properties of Nb-Si based ultrahigh temperature alloys / S. Zhang, X. Guo // Intermetallics. 2016. V.70. P.33—44.
  105. Zhang, S. Effects of Cr and Hf additions on the microstructure and properties of Nb silicide based ultrahigh temperature alloys / S. Zhang, X. Guo // Mater. Sci. Eng. A. 2015. V.638. P.121—131.
  106. Shen, F. Microstructure and oxidation behavior of Nb-Si-based alloys for ultrahigh temperature applications : A comprehensive review / F. Shen, Y. Zhang, L. Yu, T. Fu, J. Wang, H. Wang, K. Cui // Coatings. 2021. V.11. Art.1373.
  107. Venkatraman, M. The Cr-Ta (Chromium-Tantalum) system / M. Venkatraman, J.P. Neumann // J. Phase Equilibria. 1987. V.8. P.112—116.
  108. Yao, J. Effect of molybdenum on the microstructure and oxidation behavior of hot-pressed TaCr2 alloys / J. Yao, S. Lu, X. Xiao, L. Deng // Met. Sci. Heat Treat. 2019. V.61. P. 249—255.
  109. Nie, X.W. First-princi ples studies on structural and electronic properties of TaCr2 Laves phase / X.W. Nie, Y. Du, H.H. Xu // Phys. B Condens. Matter. 2010. V.405. P.4279—4282.
  110. Xue, Y. Strengthening and toughening effects in laves phase Cr2Ta/Cr in-situ composites by Si additions / Y. Xue, S. Li, Y. Wu, C. Liu, H. Liu, L. // Vacuum. 2020. V.174. Art.109202.
  111. Bhowmik, A. Effect of Mo, Al and Si on the microstructure and mechanical properties of Cr-Cr2Ta based alloys / A. Bhowmik, C.N. Jones, I.M. Edmonds, H.J. Stone // J. Alloys Compd. 2012. V.530. P. 169—177.
  112. He, Y.H. Effects of processing on the microstructure and mechanical behavior of binary Cr-Ta alloys / Y.H. He, P.K. Liaw, Y. Lu, C.T. Liu, L. Heatherly, E.P. George // Mater. Sci. Eng. A. 2002. V.329—331. P.696—702.
  113. Brady, M.P. Effects of Fe additions on the mechanical properties and oxidation behavior of Cr2Ta Laves phase reinforced Cr / M.P. Brady, C.T. Liu, J.H. Zhu, P.F. Tortorelli, L.R. Walker // Scr. Mater. 2005. V.52. P.815—819.
  114. Patent US6, 245,164B1. Dual-phase Cr-Ta alloys for structural applications / C.T. Liu [et al.]. 2001. Jun. 12.
  115. Bhowmik, A. Microstructure and mechanical properties of two-phase Cr-Cr2Ta alloys / A. Bhowmik, H.J. Stone // Met. Mater. Trans. A. 2012. V.43. P.3293— 3292.
  116. Yudin, S.N. Bulk Nb3Al intermetallic compound: Synthesis and high-temperature properties / S.N. Yudin, A.V. Kasimtsev, A.V. Korotitskiy, T.A. Sviridova, G.V. Markova, S.S. Volodko, A.A. Nepapushev, D.O. Moskovskikh // Mater. Sci. Eng. A. 2020. V.790. Art.139715.
  117. Gnanamoorthy, R. Microstructure and strength of binary and tantalum alloyed two-phase Nbss/Nb3Al base alloys / R. Gnanamoorthy, S. Hanada // Mater. Sci. Eng. A. 1996. V.207. P.129—134.
  118. Tabaru, T. High temperature strength of Nb3Al-base alloys / T. Tabaru, S. Hanada // Intermetallics. 1998. V.6. P.735—739.
  119. Shah, D.M. Evaluation of refractory intermetallics with A15 structure for high temperature structural applications / D.M. Shah, D.L. Anton // Mater. Sci. Eng. A. 1992. V.153. P.402—409.

Declaração de direitos autorais © Russian Academy of Sciences, 2024

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies