RESEARCH OF ROLLING REFRIGERATORS AT CONVECTIVE HEAT EXCHANGE
- Authors: Brovman T.V1
-
Affiliations:
- Tver State Technical University, Tver, Russia
- Issue: No 4 (2023)
- Pages: 90-94
- Section: Articles
- URL: https://journals.rcsi.science/0869-5733/article/view/141864
- DOI: https://doi.org/10.31857/S0869573323040109
- EDN: https://elibrary.ru/HVFHNH
- ID: 141864
Cite item
Abstract
The process of metal cooling by heat emission and convection is considered. Refrigerators used in modern varietal mills are calculated by the amount of heat transfer. A formula is proposed for calculating the cooling duration of the metal from 850 to 50 ° C, which gives a result 1.78 times less than the formula that does not take into account the effect of convective heat transfer. For workpieces of large thicknesses, the surface temperature differs from the average, so averaging the temperature by volume leads to errors. Refinement of the calculation of radiation surfaces increases the accuracy of calculations of cooling process.
About the authors
T. V Brovman
Tver State Technical University, Tver, Russia
Author for correspondence.
Email: brovman@mail.ru
References
- Бровман, М.Я. Деформация ползучести при изменении температуры / М.Я. Бровман // Изв. РАН. Механика твердого тела. 2019. №3. С.108-117.
- Бровман, М.Я. Кристаллизаторы установок непрерывного литья металлов / М.Я. Бровман. - М.: Теплотехник, 2011. 425 с.
- Бровман, Т.В. Определение размеров холодильников прокатных станов при изготовлении функциональных материалов/ Т.В. Бровман // Матер. IX междунар. конф. с элементами научной школы для молодежи "Функциональные наноматериалы и высокочистые вещества" (3-7 октября 2022). - Суздаль: [б.и.]. 2022. С.21.
- Бровман, М.Я. О функциях, применяемых для описания пластической деформации металлов / М.Я. Бровман // Металлы. 2011. №1. С.12-23.
- Brovman, M.Y. On the functions used to describe the plastic deformation of metals / M.Y. Brovman // Russian Metallurgy (Metally), 2011. №1. P.9-18.
- Дубинский, Ф.С. Методы проектирования температурных режимов горячей сортовой прокатки: учеб. пособ. / Ф.С. Дубинский, М.А. Соседкова. - Челябинск: Изд-во ЮУрГУ, 2007. 18 с.
Supplementary files
