Том 61, № 1 (2018)

This paper presents a robust digital video-watermarking system for copyright and copy protection. The proposed method applies the combination of discrete wavelet transform (DWT) and scene-change-detector. For better understanding, this approach can be presented in the form of four stages. The first stage is finding the frame where the watermark is to be inserted. The analysis of watermarking using the level-3 decomposition of LL subband withDWTis described in the second stage. Transparency and the robustness have been analyzed under fifteen different attacks in the third stage. Improvement in the robustness and transparency, as compare to watermarking using different levels of LL subband is calculated in terms of the normalized correlation and the structural similarity index in the fourth stage. The experimental result reveal that the proposed method yields the extracted watermark image and watermarked video of good quality and can sustain different image processing, JPEG compression and geometrical attacks. Empirical results prove the improvement in the performance as the decomposition level increases from level-1 to level-3. Comparative analysis with the existing schemes proves the improved robustness, better imperceptibility and the reduced computational time of the proposed scheme.

Mixed coefficients of coupling between the closely spaced stepped-impedance resonators in comb filters of stripline design have been investigated. Transmission zeros at frequencies f_zi correspond to mixed coupling coefficients k_i. These zeros can be moved with respect to the filter passband central frequency f₀ by modifying the shape of resonators. It was proved that the reduction of gap between resonators made it possible to locate frequencies f_z and f₀ closer to one another. The existing restrictions on the minimal value of gap between resonators limit the degree of proximity between f_z and f₀. The N-resonator stripline comb filters with mixed coupling can have N−1 transmission zeros. The absence of cross-coupling links in stripline filters simplifies their construction. It has been established that the thickness of central conductors of stripline resonators affects the positive and negative mixed coupling coefficients. The paper presents measurement data of miniature stripline three-resonator comb filter having an enhanced selectivity at the expense of two transmission zeros. The central frequency of filter is f₀ = 1850 MHz, the bandwidth BW = 100 MHz. The filter having dimensions 5.8×4.2×2 mm was implemented by connecting two ceramic substrates having relative dielectric permittivity ε_r = 92 and the metallized patterns deposited on them.

The article is devoted to the problem of the natural electromagnetic modes, the regions of their existence and the relationship with all possible types of resonances in the waveguide junction of a cylindrical and radial waveguides with a layered (laminated) filling of the radial waveguide with dielectric material. An electrodynamic model is created on the basis of a rigorous method of modal matching technique, with the separation of the common waveguide coupling region and the representation of the field in it in the form of a superposition of the fields of the partial waveguide eigenmodes. The structure under investigation can be used to measure the electrical parameters of dielectric samples of a cylindrical cross-section. It is shown that the measurements will have a local character, since the spectral characteristics of the junctions are determined mainly by the size of the central coupling region of the waveguides and by the electrical parameters of the dielectric that is in the junction. The problem of edge effects for samples of finite length (partial filling of a radial waveguide with dielectric) is investigated. Taking into account the edge effect enables reducing the error in measuring the permittivity for samples of arbitrary sizes in the investigated structure.