Printed Planar Monopole Antenna Design for Ultra-Wideband Communications
- Authors: Murugan N.A.1, Balasubramanian R.1, Patnam H.R.2
-
Affiliations:
- SRM University
- SAMEER
- Issue: Vol 61, No 6 (2018)
- Pages: 267-273
- Section: Article
- URL: https://journals.rcsi.science/0735-2727/article/view/177222
- DOI: https://doi.org/10.3103/S0735272718060055
- ID: 177222
Cite item
Abstract
This paper presents an ultra wideband (UWB) planar printed monopole antenna fed by microstrip line. The antenna configuration contains a beveled ground plane. The beveled partial ground plane improves the impedance bandwidth. The measured frequency response demonstrates that the fabricated antenna exhibits an impedance bandwidth of 7.9 GHz over 3.1 to 11 GHz for VSWR < 2. The proposed antenna has ultra-wideband characteristics with omnidirectional radiation pattern and stable gain. Ultra-wideband performance of the proposed antenna is examined through the simulated surface current distributions. Measured results confirm that the antenna is suitable for UWB applications due to its compact size and high performance characteristics.
About the authors
Neelaveni Ammal Murugan
SRM University
Author for correspondence.
Email: neelaveni.m@ktr.srmuniv.ac.in
India, Chennai
Ramachandran Balasubramanian
SRM University
Email: neelaveni.m@ktr.srmuniv.ac.in
India, Chennai
Hanumantha Rao Patnam
SAMEER
Email: neelaveni.m@ktr.srmuniv.ac.in
India, Chennai