Design of compact bandpass filter for WiMAX and UWB application using asymmetric SIRs and DGS


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

This paper considers a novel compact tri-band microstrip bandpass filter, the design of which employs asymmetric SIRs and DGS for achieving the characteristics of low insertion loss, high selectivity, wider range of bandwidth, and low group delay for 2.5/3.4 GHz (WiMAX) and 4.14–5.32 GHz (UWB) bands. The novel filter design implies the intentional selection of impedance ratio R and the length of the microstrip of asymmetric SIRs; in addition, DGS is used to improve the coupling strength of the last band. The scattering parameters of the three passbands have the following values: insertion losses S21 are–0.26/–0.07/–0.05 dB, and return losses S11 are–11.29/–19.25/–22.64 dB, respectively. The response of the filter was simulated using Ansoft HFSS simulator.

About the authors

Tasher Ali Sheikh

North Eastern Regional Institute of Science and Technology

Author for correspondence.
Email: tasher372@gmail.com
India, Nirjuli

Janmoni Borah

North Eastern Regional Institute of Science and Technology

Author for correspondence.
Email: borah1989@gmail.com
India, Nirjuli

Sahadev Roy

National Institute of Technology

Author for correspondence.
Email: sahadevroy@gmail.com
India, Arunachal Pradesh


Copyright (c) 2016 Allerton Press, Inc.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies