Analysis of Techniques for Verification of Coating Thickness Gauges
- 作者: Sekatskii V.1, Gavrilova O.1, Merzlikina N.1, Morgun V.2
-
隶属关系:
- Sibirian Federal University
- State Regional Center for Standardization, Metrology, and Testing Krasnoyarsk TsSM
- 期: 卷 62, 编号 9 (2019)
- 页面: 762-768
- 栏目: Article
- URL: https://journals.rcsi.science/0543-1972/article/view/246776
- DOI: https://doi.org/10.1007/s11018-019-01692-0
- ID: 246776
如何引用文章
详细
An analysis of the structure and content of verification technique MP 002.D4-14, extends to coating thickness gauges TM-2, TM-3, TM-4, and TM-4T, technique MP 159-261-2016 for verification of SaluTrjn coating thickness gauges, and a technique for verification of coating thickness gauges regulated by GOST 8.502–84 is performed. It is shown that the first two techniques do not take into account the random component of the error, while the third technique does take into account the random component but not correctly. These factors all lead to a high probability of a wrong identification of a model of a thickness gauge that is, in reality, defective to be, instead, a working model or, on the other hand working devices may be incorrectly identified as being defective. To increase the reliability of the results of a verification of coating thickness gauges, recommendations that suggest incorporating them into the content of a verification technique regulated by GOST 8.502–84 are proposed.
作者简介
V. Sekatskii
Sibirian Federal University
编辑信件的主要联系方式.
Email: sekackiy@rambler.ru
俄罗斯联邦, Krasnoyarsk
O. Gavrilova
Sibirian Federal University
Email: csm@rkrascsm.ru
俄罗斯联邦, Krasnoyarsk
N. Merzlikina
Sibirian Federal University
Email: csm@rkrascsm.ru
俄罗斯联邦, Krasnoyarsk
V. Morgun
State Regional Center for Standardization, Metrology, and Testing Krasnoyarsk TsSM
编辑信件的主要联系方式.
Email: csm@rkrascsm.ru
俄罗斯联邦, Krasnoyarsk