Correction of the Measured Amplitude-Phase Field Distribution in the Near Field from the Directional Pattern of the Probe
- Authors: Anyutin N.V.1, Malai I.M.1, Ozerov M.A.1, Titarenko A.V.1, Shkurkin M.S.1
-
Affiliations:
- All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
- Issue: Vol 61, No 1 (2018)
- Pages: 67-71
- Section: Article
- URL: https://journals.rcsi.science/0543-1972/article/view/246386
- DOI: https://doi.org/10.1007/s11018-018-1389-2
- ID: 246386
Cite item
Abstract
A new method of correcting the amplitude-phase field distribution in the near field is proposed. The correction is made in accordance with the probe’s directional pattern. Unlike existing methods of correcting the restored directional pattern of the antenna under study in accordance with the probe directional pattern, this method can be applied to any scanning surface. It does not require numerical solution of integral expressions for each point. The effectiveness of the proposed method is shown using the example of the recovery of the directional patterns of horn and mirror antennas using a planar scanner.
About the authors
N. V. Anyutin
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Author for correspondence.
Email: anyutin@vniiftri.ru
Russian Federation, Moscow Oblast, Mendeleevo
I. M. Malai
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Email: anyutin@vniiftri.ru
Russian Federation, Moscow Oblast, Mendeleevo
M. A. Ozerov
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Email: anyutin@vniiftri.ru
Russian Federation, Moscow Oblast, Mendeleevo
A. V. Titarenko
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Email: anyutin@vniiftri.ru
Russian Federation, Moscow Oblast, Mendeleevo
M. S. Shkurkin
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Email: anyutin@vniiftri.ru
Russian Federation, Moscow Oblast, Mendeleevo
Supplementary files
