Predicting the Technical State of a Turning Tool on the Basis of Phase-Chronometric Measurement Information

M. I. Kiselev; A. S. Komshin; A. B. Syritskii

doi:10.1007/s11018-018-1321-9

Predicting the Technical State of a Turning Tool on the Basis of Phase-Chronometric Measurement Information

Authors: Kiselev M.I.¹, Komshin A.S.¹, Syritskii A.B.¹
Affiliations:
1. Bauman Moscow State Technical University (BMSTU)
Issue: Vol 60, No 11 (2018)
Pages: 1081-1086
Section: Article
URL: https://journals.rcsi.science/0543-1972/article/view/246324
DOI: https://doi.org/10.1007/s11018-018-1321-9
ID: 246324

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

We describe a predictive method for monitoring the state of a turning tool during processing. The results of the prediction, based on phase-chronometric measurement information, are considered. The possibility of practical application of the described prediction technique in combination with phase-chronometric data is shown. We present an algorithm for predicting the actual wear of the tool using an example of simplest turning.