Email this article Calculation and Experimental Check of the Speed of Thermal Flow Sensors Based on Borelius Anisotropic Thermoelements
- Authors: Bochegov V.I.1,2, Grabov V.M.1, Divin N.P.1, Parakhin A.S.2
-
Affiliations:
- Gerzen Russian State Pedagogical University
- Kurgan State University
- Issue: Vol 60, No 1 (2017)
- Pages: 42-45
- Section: Thermal Measurements
- URL: https://journals.rcsi.science/0543-1972/article/view/246052
- DOI: https://doi.org/10.1007/s11018-017-1147-x
- ID: 246052
Cite item
Open Access
Access granted
Subscription Access
Abstract
A thermal flow sensor is examined, in the form of a battery made from Borelius elements assembled by means of interconnection soldering and adhesive insulating interlayers. The dependence of the sensing signal on time as well as on the sizes of design elements and the thermophysical parameters of structural materials is calculated. Results of calculation and experiment are compared. Methods for increasing the speed of such devices are proposed.
Keywords
About the authors
V. I. Bochegov
Gerzen Russian State Pedagogical University; Kurgan State University
Author for correspondence.
Email: max_vib@mail.ru
Russian Federation, St. Petersburg; Kurgan
V. M. Grabov
Gerzen Russian State Pedagogical University
Email: max_vib@mail.ru
Russian Federation, St. Petersburg
N. P. Divin
Gerzen Russian State Pedagogical University
Email: max_vib@mail.ru
Russian Federation, St. Petersburg
A. S. Parakhin
Kurgan State University
Email: max_vib@mail.ru
Russian Federation, Kurgan
Supplementary files
