Email this article Vibroacoustic Monitoring of the Major Parameters of Electrical Discharge Machining
- Authors: Kozochkin M.P.1, Porvatov A.N.1, Grigor’ev S.N.1
-
Affiliations:
- STANKIN Moscow State Technological University
- Issue: Vol 59, No 11 (2017)
- Pages: 1228-1233
- Section: Article
- URL: https://journals.rcsi.science/0543-1972/article/view/245990
- DOI: https://doi.org/10.1007/s11018-017-1120-8
- ID: 245990
Cite item
Open Access
Access granted
Subscription Access
Abstract
The possibility of using vibroacoustic signals for monitoring the efficiency of discharge pulses during electrical discharge machining is examined. Data on the effect of the variable dynamic characteristics of billets and background noise for electrical discharge machining in different frequency ranges on the parameters of vibroacoustic signals are presented.
About the authors
M. P. Kozochkin
STANKIN Moscow State Technological University
Email: porvatov_artur@mail.ru
Russian Federation, Moscow
A. N. Porvatov
STANKIN Moscow State Technological University
Author for correspondence.
Email: porvatov_artur@mail.ru
Russian Federation, Moscow
S. N. Grigor’ev
STANKIN Moscow State Technological University
Email: porvatov_artur@mail.ru
Russian Federation, Moscow
